When to do idle air volume learning in Nissan Murano?
Each time electric throttle control actuator or ECM is replaced. Idle speed or ignition timing is out of specification. Before performing Idle Air Volume Learning, make sure that all of the following conditions are satisfied.
When to release the accelerator on a Nissan Murano?
Fully release the accelerator pedal within 3 seconds after the MIL turned ON. Start engine and let it idle. Wait 20 seconds. Rev up the engine two or three times and make sure that idle speed and ignition timing are within the specifications.
How to learn idle air volume Nissan Maxima?
Check that all items listed under the topic PREPARATION (previously mentioned) are in good order. Turn ignition switch OFF and wait at least 10 seconds. Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds. Repeat the following procedure quickly five times within 5 seconds.
What’s the idle air volume learning procedure for Nissan Versa?
Repeat the following procedure quickly five times within 5 seconds. Fully depress the accelerator pedal. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds until the MIL stops blinking and turned ON. Fully release the accelerator pedal within 3 seconds after the MIL turned ON. Start engine and let it idle.
Fully release the accelerator pedal within 3 seconds after the MIL turned ON. Start engine and let it idle. Wait 20 seconds. Rev up the engine two or three times and make sure that idle speed and ignition timing are within the specifications.
Each time electric throttle control actuator or ECM is replaced. Idle speed or ignition timing is out of specification. Before performing Idle Air Volume Learning, make sure that all of the following conditions are satisfied.
Check that all items listed under the topic PREPARATION (previously mentioned) are in good order. Turn ignition switch OFF and wait at least 10 seconds. Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds. Repeat the following procedure quickly five times within 5 seconds.
What’s the idle relearn procedure for a car?
1. Make sure the accelerator pedal is fully released. 2. Turn ignition ON, do not start the engine, then wait 3 seconds turn the ignition back off and wait for 10 sec.. redo this procedure 3 times 3. Next, Fully depress and release the accelerator pedal 5x within 5 seconds 4. Wait 5 seconds, then fully depress and hold accelerator pedal.
How does an idle air control valve work?
The IACV valve is operated by a step motor. This motor has winding phases and is actuated by the output signals of ECM. Each time the IACV opens or closes to change air quantity, the ECM sends a pulse signal to the motor. A certain voltage signal is issued so that the valve remains at a particular opening.
How does idle air control valve p0505 HD work?
Each time the IACV opens or closes to change air quantity, the ECM sends a pulse signal to the motor. A certain voltage signal is issued so that the valve remains at a particular opening. Check with your vehicle’s repair manual for testing parameters. This happens to be a ’97 Nissan Maxima.
What is the idle control code on a Nissan Murano?
This Nissan Murano had a code P0507 after performing other repairs and cleaning out the throttle body.
Where is the idle air control valve located?
To correct an uneven idle or stalling engine, you may need to clean or replace the idle air control valve. It is a part of the electrical system on most modern cars and is located next to the throttle body. Trace the air cleaner hose across the top of the engine to where it connects to the engine.
Can a bad idle control valve cause stalling?
This is controlled by the engine’s computer. Sometimes parts go bad, which results in your car idling strangely or stalling. Check to see if your idle control valve is functioning properly before attempting to replace it. Look for a high engine idle. A common symptom of a faulty idle control valve can be a high idle.