When to change the front brake pads on a Subaru Forester?
This automotive maintenance tutorial was specifically written to assist owners of the fourth generation (2014, 2015, 2016, 2017 and 2018) Subaru Forester SUV in changing the front disc brake pads and lubricating the caliper slider pins.
What do I need to replace front brake pads?
The metal spring clips help keep the pads away from the rotor when the brake pedal is released. If your set of new front brake pads includes replacement brake hardware, remove the two pad abutment or “anti-rattle” clips from the top and bottom of the bracket.
Can you replace the brake pads on a 2015 Outback?
I am replacing the rear brake pads on on 2015 Outback. While waiting for parts I accidentally activated the parking breaks. Since no pads were in place to stop the calipers from extending, they extended beyond normal range. I cannot seem get the calipers compressed back into place now. They seem rigid and not willing to compress. Any ideas?
Is the parking brake the same as the pads?
2015 does not use the two systems involving separate brake “pads” and “shoes” acting separately on different parts of the rotor. Instead, there’s an electric parking brake “actuator” on the rear brake assembly that uses the same pads as the regular driving pads to hold the rotor. (See attached.)
This automotive maintenance tutorial was specifically written to assist owners of the fourth generation (2014, 2015, 2016, 2017 and 2018) Subaru Forester SUV in changing the front disc brake pads and lubricating the caliper slider pins.
How do you set the clock on a Subaru Forester?
To set the clock to the correct time in your Subaru Forester, WRX or Crosstrek Hybrid, simply follow these steps. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What should lug nut torque be on Subaru Forester?
The owner’s manual lists the lug nut torque specification as being a range between 88 to 110 lb-ft. Sit in the driver’s seat of the vehicle and firmly push down the brake pedal a few times to restore the brake line pressure. Check the brake fluid in the reservoir and verify that it is at the proper level.
What’s the default Start button on a Subaru Crosstrek?
Please try again later. The default setting for your push button start keyfob for the 2018 Crosstrek and the 2017/2018 Impreza is to only unlock the driver’s door when you touch the driver’s door handle. This video shows how to change the setting to automatically unlock all the doors when you touch the driver’s door handle.