What type of transmission fluid does Audi take?
Most Popular Audi Transmission Fluids Meets approvals Dexron III/VI, VW TL521.
How many quarts does a 2003 Audi A4 take?
6.8 quarts
Engine Oil Make sure the oil meets the Audi, Volkswagen oil quality standards listed. Capacity: 6.8 quarts.
How do you fill transmission fluid in Audi A4?
You will need to purchase a fluid pump to pump the fluid into your transmission to fill it back up….The location of the drain and fill plugs differs as well, but both are under the car in roughly the same area.
- Step 1 – Raise and secure car.
- Step 2 – Drain old fluid.
- Step 3 – Fill transmission with fluid.
How do you fill transmission fluid in Audi a4?
What type of oil does a 2003 Audi A4 take?
Audi A4 2003, API-Licensed™ Multi-Grade SAE 5W-30 Synthetic Motor Oil, by Royal Purple®.
What kind of oil does my 2003 Audi A4 take?
Castrol Edge Synthetic Motor Oil 5W-40 1 Quart.
How do you fill Audi transmission fluid?
Do you need to change the transmission fluid on an Audi A4?
Audi may consider the automatic transmission fluid in your A4 to be good for the life of the car, but that only means it is good for the lifetime of the warranty. It does need to be changed occasionally in order to keep the transmission as well as torque converter working properly and shifting smooth.
Where are the drain and fill plugs on an Audi A4?
With the underbody trays off you can see the filter lines at the front of the transmission (green arrow), the filter (yellow arrow) and the drain and fill plugs (red arrow). There are two plugs on the lower case of the transmission: the 16mm XZN drain plug (red arrow) and the 10mm Allen fill plug (yellow arrow).
What should the transmission temperature be in an Audi A4?
Pump in enough fluid until it starts dripping out from the fill hole. The transmission needs to be at operating temperature (35C-45C or 95F-113F). Start the motor and with your foot firmly on the brake shift the transmission through all the gears. Using your code reader or an infrared thermometer get the transmission up to operating temperature.
How much fluid do I need for a transmission change?
An average fluid change will use 4.5-5 liters of new fluid (plus another .5-1 quart if you changed the filter). Pump in enough fluid until it starts dripping out from the fill hole. The transmission needs to be at operating temperature (35C-45C or 95F-113F).