What size are Harley oil lines?
You can use 3/8″ auto-trans cooler line for the oil line. Though the fuel line is 1/4″ stock, most people have upgraded the carb and petcock and end up with 5/16″ there.
How many horsepower is a 1340?
48.00 HP
The engine produces a maximum peak output power of 48.00 HP (35.0 kW) @ 4900 RPM and a maximum torque of 86.30 Nm (8.8 kgf-m or 63.7 ft. lbs) @ 2400 RPM ….
| Harley-Davidson 1340 Softail Custom Engine and Transmission Technical Data | |
|---|---|
| Maximum power – Output – Horsepower | 48.00 HP (35.0 kW) @ 4900 RPM |
What size are Shovelhead oil lines?
You have barb fittings on there; regular 5/16″ oil line works. Easiest plan would probably be to cut the nipples off the tank, drill, and tap to 1/8″ NPT.
What is the oil line routing on a 91 Evo Softail?
Hi, we have got a 91 evo softail. we need a more detailed info on the oil line routing. We have it taken apart outside, & need to get it together. on a evo motor with a horseshoe style tank (main feed in back [?] and two fittings up towards the front) and a factory oil pump (two fittings.
What are the oil lines on a Harley Evo?
The evolution’s external filter requires two oil lines; one line feeds. on a evo motor with a horseshoe style tank (main feed in back [?] and two fittings up towards the front) and a factory oil pump (two fittings. pull out my 90 FX/Softail HD Service Manual & the only oil line diagram is for.
Where is the oil return line on a Harley Davidson?
The outside line going to one side of the oil filter the other side of the oil filter line is oing to the bottom of the s&s pump facing forward. Rear line on the bag is going to the oil pump feed. Fired it oil is foaming in the bag and I can’t see an oil return line in bag.
What should the oil level be on a Softail dip stick?
See Engine Oil Dipstick. Remove the dipstick and verify the level of the oil. The correct oil level should register midway (2) between the FULL and ADD marks on the dipstick. If oil level is at or below the ADD mark, add only enough oil to bring the level to the middle of the two marks on the dipstick.
What are the oil lines on a Harley evolution?
If you have a Twin Cam model versus an Evolution model, make sure to watch our Twin Cam Harley oil tank removal video. These four lines are the feed line, return line, vent & drain. It is of upmost importance that these lines are reinstalled correctly. If necessary, take a photo, draw a diagram, or label the oil lines.
See Engine Oil Dipstick. Remove the dipstick and verify the level of the oil. The correct oil level should register midway (2) between the FULL and ADD marks on the dipstick. If oil level is at or below the ADD mark, add only enough oil to bring the level to the middle of the two marks on the dipstick.
When to do engine oil level hot check?
Engine oil level hot check should be performed only when engine is at normal operating temperature. Ride motorcycle until engine is at normal operating temperature. Place vehicle on level ground and rest the vehicle on its jiffy stand (unless sidecar is attached). Allow engine to idle for 1-2 minutes. Turn engine off. See Engine Oil Filler Cap.
When to remove Softail oil tank on Harley?
Taking an extra couple of minutes doing this can help to avoid damage from a slip, or mishap; possibly saving you some unnecessary aggravation. Start the Softail oil tank removal process by draining your oil tank. Draining the motorcycle one day before the job is ideal. Remove your battery and battery pad.