What should I do when my throttle body is replaced?
Anytime the ECM or the throttle body is replaced, the ECM must learn the idle position. The engine idle may be unstable or a DTC may set if the idle position is not learned. 1. Turn OFF the ignition for 30 seconds. 2. Turn ON the ignition, with the engine OFF for 60 seconds.
How long does it take for GM throttle body to relearn?
If you don’t do a relearn procedure, the PCM will “hunt” for a new baseline idle. It will eventually learn it on its own, but it may take over a week of driving, during which time you will experience high and low idle speeds and possibly rough idle. 1) Start the engine and let it idle in park for 3 minutes.
Why did my Altima 2.5L not start up?
My 2013 altima 2.5L could not start an engine. It turned on P0101 and P2119. After replacing an air filter and cleaning MAF and throttle body, it seemed that everything is fine. However, in the next day, ECM set P0101 again. I replaced MAF filter and PCV valve, but it could not solve my problem.
How to do throttle body re-Learn Chevy Malibu?
1) Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2) After 3 minutes, turn the engine off and leave it off for 60- seconds. 3) Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light.
How to relearn the Nissan throttle body procedure?
Transmission must be warmed up (driven for at least 10 minutes.) 1) Perform the Accelerator Pedal Released Learning procedure. This procedure tells the ECU what voltages to expect when your foot is off the pedal Turn ignition switch OFF and wait at least 10 seconds. Turn ignition switch ON.
When to reprogram my Car’s Throttle Body?
Throttle Body Relearn: When Should I Reprogram My Car’s Throttle Body? – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How to do idle Relearn on a Nissan Altima?
Turn the ignition switch back on for at least two more seconds, then off again. Turn the ignition switch on again and wait two seconds, then off again for 10 seconds. Make sure you can hear the electric motor on the throttle moving at this time. It will make a buzzing sound. Start the engine and run it until it gets to operating temperature.
1) Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2) After 3 minutes, turn the engine off and leave it off for 60- seconds. 3) Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light.