What kind of timing chain does a Toyota RAV4 have?
All 2013 Toyota Rav4 models have a timing chain and an interference engine. All 2012 Toyota Rav4 models have a timing chain and an interference engine. All 2011 Toyota Rav4 models have a timing chain and an interference engine.
How to remove timing belt from Toyota RAV4?
You do not need to drain or disconnect the power steering reservoir or lines. Simply lift up the plastic reservoir from it’s clip, remove the bolt holding the hardline pipe from the fenderwall/wheel well (10mm socket) and push the whole assembly back towards the firewall. 2.
What kind of engine does a RAV4 have?
Your Rav4 had two engine options, the 2.4 liter four and the 3.5 liter six and they both have a timing chain, not the dreaded timing belt. Your timing chain will not need to be replaced or serviced in normal use, just keep up with your oil changes.
How to install balance shaft on Toyota RAV4?
Install balance shaft Rotate the no. 1 Driven gear of the no. 1 Balance shaft in the rotating direction until it hits the stopper. Confirm that the timing marks on the no. 1 And no. 2 Driven gears are aligned. Align the timing marks of the no. 1 And no. 2 Balance shafts as shown in the illustration.
When do I need to replace my timing chain?
In order to keep this synchronization in tiptop shape, you will need to be aware of when it is time to replace your timing belt or timing chain. The material used: timing belts are made of rubber and timing chains are made of metal. Timing chains were implemented before timing belts. Timing belts were introduced later on in the 1960s.
How to remove timing chain from Death Rattle?
Once the timing chain is removed hold it up with a rubber bungee cord. The gear will need to be rotated so the key way is facing 5 o’clock position to be able to be removed from the engine.
Where is the timing chain on a T-sb-0041-13?
Turn the crank 10° counterclockwise to give some slack to the timing chain. You can then remove the top timing chain guide with the 12mm bolt. Above the crankshaft bolt you will find the timing chain cover held on by four 10mm bolts. Pop the cover off and you will see the timing chain tensioner.
What are the symptoms of a bad timing chain?
Symptoms of a Bad or Failing Timing Chain. 1 1. Engine misfires or runs poorly. There are two ways to achieve valve timing in a combustion engine. The first is the two-gear method, which includes 2 2. Metal shavings found in the oil. 3 3. Engine won’t start or fails. 4 4. Check Engine Light is on. 5 5. Engine rattles while idling.
How do you install a chain on a camshaft?
Install the chain onto the crankshaft timing sprocket with the gold or orange mark link aligned with the timing mark on the crankshaft. Using sst and a hammer, tap in the crankshaft timing sprocket. Align the gold or yellow links with each timing mark located on the camshaft timing gear and sprocket, then install the chain.
When do you need to replace the timing chain?
If this situation occurs, it’s likely the timing chain is damaged and needs to be replaced as soon as possible. If the timing chain breaks, the loose metal rolling around inside the motor can lead to serious engine damage. 2. Metal shavings found in the oil