What kind of timing belt does a Toyota 4Runner use?
This article applies to the Toyota 4Runner (1996-2002), Tacoma (1995-2004), and Tundra (2000-2004). Timing belts are often used in overhead cam engines to keep the valvetrain in sync with the movement of the crankshaft.
What kind of timing belt do you need for Toyota Tundra?
This article outlines the timing belt and water pump replacement procedure for the Toyota 5VZ-FE 3.4L V6 engine as equipped in Tundra, 4Runner, and Tacoma models. Note that there may be minor differences among the vehicles in which this engine is fitted.
What should I replace the timing belt on?
We not only show you how to replace the timing belt but we also show you how to replace all the associated parts; the water pump, both idler pulleys, the timing belt tensioner, thermostat, both cam shaft seals and the crank shaft seal. **Since we shot the video, we learned a trick from a guy local to us who’s an experienced mechanic.
How to set up timing belts for Toyota 5VZ-FE?
The following thread will explain how we set up the Toyota 5VZ-FE Timing Belt marks when replacing the timing belt. The first thing is that you know which Bank is #1 and which Bank is #2. Here is a reference…
How do you remove power steering belt on Toyota 4Runner?
Belt routing. Loosen the power steering pump pivot bolt using a socket through the hole in the pump pulley. Next, loosen the tensioner lock nut and turn the adjuster counter-clockwise to loosen the belt tension until the power steering belt can be slipped off. Figure 10. Power steering pump belt loosening points.
How do you remove the timing belt cover?
Timing belt cover removal. In some cases, the oil dipstick tube may need to be removed to access the timing belt cover. This can be done by simply removing the fastening bolt from the alternator bracket (see arrow in Figure 8) and wiggling the dipstick tube back and forth to remove it from the oil pan.
Can a timing belt be replaced with a harmonic dampener?
Always use the correct procedure and tools to pull the dampener from the vehicle. To replace the timing belt on most vehicles, the dampener must be removed. The most important thing to remember is to never put pressure on the outer ring or try to persuade it with a hammer.
How do you remove alternator belt on Toyota 4Runner?
A/C belt tensioner pulley. To remove the alternator belt, loosen the pivot bolt and lock nut before turning the tensioning bolt counter-clockwise to relieve belt tension. With the belts removed, the fan belt pulleys at the fan bracket can also be removed.