What kind of minute Mount plow do I Need?
I recently had a fisher minute mount plow installed on my 2000 dodge… Its is The three plug style with isolation module, it was used about 1 year old but all the wiring was in great condition.
What to do if Your Plow controller keeps shutting off?
I just recieved a “jump wire” that plugs in between the controller and the wiring harness @ the floorboard that comes from the plow. Fisher knows of the issue, and this is supposed to be the solution. Call your dealer, and ask for it. Here’s a picture of mine. Part number on the sticker is 69787.
Can a three plug plow have no power to control?
Check your grounds and clean the battery connections. Yes three plug Plow is hooked up and all fuses and connections cleaned and greased . Wonder if the module for lights would have anything to do with no power to control?
Why is my Fisher minute Mount 2 plow not raising?
Sounds like pump is not working, check all fuild lines. Unless the plow is all electric, then the ground You can’t post conmments that contain an email address. check your connections, especially the main power plug in, i have used a small “c” clamp over the connection to aid in the same problem
Is the Fisher minute Mount 2 plow working?
Fisher minute mount 2 plow wont raise up or go left or right. I sounds like the pump is working when I hit the control stick in the cab but no movement. I cleaned all electrical contacts and still no luck.
Is there no power to controller or plow?
No does not work with either plow attached to truck. The plows works with other truck that everything works Ok so it’s a truckside issue. Look at the wiring repo posted, also, double ck your controller power feed from the truck, and the controller connector.
What should I do if my snow plow goes down?
If all looks good, make sure the harness are connected at the grill, start the truck, turn the control on, put the plow in float mode (hold the down button for 4 seconds), Grab a screw driver and hold it up to the S1 valve (white and yellow wire going to it), does it have a magnetic pull to it?
How does power to control work on Fisher Snowplow?
Yes the module controls power to the controller. The module sees a ground when you plug in the grill plugs, then it turns on the controller. I would get the wiring diagrams and start looking for missing voltage.