What is the torque setting for the bolts?
US Recommended Bolt Torque
| Size | Recommended Torque | |
|---|---|---|
| Grade 2 | 18-8 S/S | |
| 5/8″ | 73 | 104 |
| 3/4″ | 125 | 124 |
| 7/8″ | 129 | 193 |
Why is it important to lubricate slide pins?
Over time, the slide pins lose their lubrication and don’t slide the calipers so well. This lack of lubrication causes a few things to happen. While there is a rubber cover protecting the slide pins, they experience brake dust and rust buildup, which hinders the calipers from sliding.
How tight do flywheel bolts need to be?
The flywheel bolt should be torqued to 43 foot pounds.
What do I torque my flywheel to?
Tighten all bolts evenly, ¼ turn at a time in a crisscross pattern until flywheel is completely drawn-up to the crankshaft. Torque all bolts in 3 steps: First to 25 ft/lbs. then 60 ft/lbs. Final torque to: 78 – 80 ft/lbs.
How much torque can a 1/2 inch bolt take?
ASTM A449 / SAE Grade 5*
| Bolt Size | TPI | Tightening Torque (ft lbs) |
|---|---|---|
| Galv+Waxed | ||
| 1⁄2 | 13 | 38 |
| 9⁄16 | 12 | 54 |
| 5⁄8 | 11 | 75 |
How many times can a bolt be torqued?
Plain ASTM A325 bolts, however, possess sufficient ductility to undergo more than one pretensioned installation as suggested in the Guide (Kulak et al., 1987). As a simple rule of thumb, a plain ASTM A325 bolt is suitable for reuse if the nut can be run up the threads by hand.”
What is the torque of a banjo bolt?
To Learn the Tightening Torque of Your Banjo Bolt Fittings in Either Newton – Metre or Pounds Force – Feet From the Chart Below, Determine the Banjo Bolt Size. For BRASS Fittings and Adapters Use 65% of the Torque Values
What kind of torque does a Ford pickup have?
Type: Bolt Clutch Release Cylinder To Transmission 21.69 Gen X 150/250 – Clutch Release Cylinder Bolts Type: Bolt 298.28 Gen X 150/250 – FRONT Pivot LEFT REAR Cam (2WD) Type: Bolt
What are the torque settings on a MGB?
MGB Torque Specifications Area of Use Torque (ft/lbs) Notes General Use Gearbox remote control cover to tunnel 44 to 46 All models Hydraulic brake pipe connection, 3/8 UNF 5 to 7 Hydraulic brake pipe connect, 7/16 UNF 7 to 10 Alternator shaft nut 25 to 30 All models Interior mirror special screw 5 All models
What should I know about torque in.lbs?
In. Lbs. Common Sense and Safety should always be observed when working on your vehicle or doing modifications. Jackstands, wheel blocks, disconnecting the battery are a few of the basic safety precautions that should be used and may not be mentioned in the write ups on this site.