What is the difference between honed and tumbled travertine?
The difference between honed and tumbled travertine is in the texture of their surfaces. Honed travertine has a softer appearance and a lightly polished surface whereas tumbled travertine has a more rustic appearance due to its unfilled holes and unpolished surface.
Does travertine tile break easily?
Travertine is softer than many other stones and porcelain, yet it’s also strong and less likely to break. This combination makes travertine comparatively easy to cut, which reduces the labor and time involved in the installation job.
Can you polish tumbled travertine?
When travertine is tumbled, it is hard to achieve a high gloss like shine. Honed or Polished travertine tiles are treated tiles that have been ground down to one smooth finish, and all the tiles are the same thickness. Depending on the grade of travertine, honed and polished tiles may need to be filled.
Is tumbled travertine slippery when wet?
Travertine tiles are slippery when wet, just as most glazed ceramic tiles, porcelain tiles, marble tiles, and granite tiles are. There are many “non-slip” coatings which can be applied to natural stone tiles that will increase their SCOF rating. Applying a “Non-slip” coating or sealer can raise the SCOF by .
Do you grout the holes in travertine?
These holes help to give travertine its characteristic look and finish. The holes can be filled with grout during the grouting process to help stabilize the stone, help keep it clean and give it a finished appearance, or left unfilled to provide a more natural look.
Does travertine look cheap?
However, real travertine has its limitations. It’s expensive, it needs special care, and there are places it shouldn’t be installed at all, such as showers and floors with heavy traffic. While these methods might deliver some of the characteristics of quality travertine tile, they often end up looking cheap and tacky.
Can cracks in travertine tile be repaired?
Using colored caulk or epoxy that matches the shade of your travertine tile, it’s possible to repair small cracks. While you might not see a thin crack at first, after a while it will become more prominent as dirt gets caught in the crack and darkens it.
Can you use Swiffer wet on travertine floors?
Sand, dirt and grit do the most damage to natural stone surfaces due to their abrasiveness. Floors should be dust mopped frequently using a clean, non-treated dry dust mop or broom. A “Swiffer” type dry mop is fine, but stay away from the “wet” attachments, as the chemicals in them can damage natural stone.