What is group 6 zoning NYC?
The NYC Zoning Resolution has Use Groups to categorize buildings based on their use. NYC Zoning Use Group 6 consists of Commercial uses such as Personal Services, Restaurants, Offices, and Retail.
What is M1 zoning NYC?
What is a M1 Zoning District? The M1 district is often a buffer between M2 or M3 districts and adjacent residential or commercial districts. Light industries typically found in M1 areas include woodworking shops, auto storage and repair shops, and wholesale service and storage facilities.
What does M1 zoning mean?
light industrial
M1 districts typically include light industrial uses, such as woodworking shops, repair shops, and wholesale service and storage facilities. Nearly all industrial uses are allowed in M1 districts if they meet the stringent M1 performance standards. Offices, hotels and most retail uses are also permitted.
What does M1 mean in real estate?
LIGHT INDUSTRIAL ZONE
LIGHT INDUSTRIAL ZONE (M1)
What does use group mean?
Use Group is the first factor that determines the safety requirements for a building. The purpose of a Use Group is to define how the building will be used. The Virginia Uniform Statewide Building Code establishes ten general Use Groups with 27 individual Use Groups.
What do different zoning codes mean?
NSW (New South Wales) R2 – Low Density Residential. R3 – Medium Density Residential. R4 – High Density Residential. R5 – Large Lot (Rural) Residential.
What is R6B zoning in Brooklyn?
What is an R6B Zoning District? R6B districts are often traditional row house districts, designed to preserve the scale and harmonious streetscape of the neighborhoods developed during the 19th century with four-story attached buildings. Many of these houses are set back from the street by stoops or small front yards.
What is considered floor area?
The floor area of a building is the total gross horizontal areas of all floors of a building, including usable basements and all other areas measured from the interior face of the exterior walls or, in the case of a shared wall, from the centerline of a wall separating the 2 buildings.
Is an extension or increase in floor area or height?
Related Definitions Addition (to an existing building means an extension or increase in the floor area or height of a building or structure.
What are the zoning regulations for m1-1d?
In M1-1D, M1-2D, M1-3D, M1-4D and M1-5D Districts, for any zoning lot containing both residential use and community facility use, the total floor area used for residential use shall not exceed the amount permitted in Section 43-61 (Bulk Regulations for Residential Uses in M1-1D Through M1-5D Districts).
What’s the maximum floor area for an M1-6 district?
Notwithstanding any other provisions of this Resolution, the maximum floor area ratio in an M1-6 District shall not exceed 12.0.
Where are the M1 districts in New York City?
M1 districts range from the Garment District in Manhattan and Port Morris in the Bronx with multistory lofts, to parts of Red Hook or College Point with one- or two-story warehouses characterized by loading bays. M1 districts are often buffers between M2 or M3 districts and adjacent residential or commercial districts.
Which is the highest density manufacturing district in NYC?
In the highest density manufacturing district, M1-6, mapped only in Manhattan, an FAR of 12 can be achieved with a bonus for a public plaza. Except along district boundaries, no side yards are required.