What is AES50 cable?
5.0 out of 5 stars AES-50 Cable is better connector than typical CAT5 or CAT5e. AES-50 is basically a XLR metal housing, with locking mechanism, around a CAT5e cable.
Can AES50 go through a switch?
AES50 is an OSI layer 1 protocol, meaning that it uses RJ45 connectors but signals have no ethernet packeting and no IP routing capability. It doesn’t work across network switches. It’s simply a point-to-point signal connection that happens to use the physical connectors also used by ethernet.
Is AES50 an Ethernet?
AES50 (and HyperMAC) take a very different approach to IP-based audio systems. They use the physical layer only of the Ethernet technology – the cables and transceivers at each end.
Does AES50 need to be shielded?
Because AES50 uses all the pins within the cable, the type of cable you choose is important. For the best results, Behringer recommends using a shielded CAT 5e cables with Ethercon connectors wired to the T568B standard.
Is AES50 the same as Madi?
The AES50 interface has three ports and can handle up to 72 channels at 96kHz in both directions at the same time. The MADI version gives you even more, reaching extraordinary 128 48kHz, bidirectional channels.
Is AVB the same as Dante?
AVB (also known as “IEEE 802.1BA”) has almost the same specifications as Dante, with a slightly higher minimum latency of 250 microseconds. However, it is an open standard, meaning manufacturers do not need to license the technology.
What is the difference between AES67 and Dante?
Dante already implements an IP Layer 3 transport, but AES67 will provide an alternative open standard within Dante for transport using the Real-time Transport Protocol (RTP) developed by the Internet Engineering Task Force (IETF). Like Dante’s transport layer today, AES67 is by nature a routable IP protocol.
Is AVB compatible with Dante?
Neither AES67 nor AVB are competitive equivalents to Dante. AES67 and AVB are both a collection of standards, which are not actual implementations. Dante is a commercially supported solution, and more than just a standard.
How many channels can AES50 carry?
AES50 is another point to point network like AES3 and MADI, with the ability to carry 48 channels bidirectionally. AES50, like MADI and AES is dependent on clocking and sample rates. AES50 runs over a single cat5 cable and can be run up to 300ft or can be converted to fiber and run much longer.
Is Cat5e shielded?
While Cat5 Ethernet cable supports speeds up to 100 megabits per second, Cat5e supports networks up to 1 gigabit (1000 megabits per second). Another differentiator from plain Cat5, Cat5e comes in shielded varieties, reducing noise.
Is there a free implementation of AES50?
• Anyone is free to create their own implementation. SuperMAC is a proprietary implementation of AES50. • AES50 is based on SuperMAC, which was created by Sony Pro-Audio Lab, Oxford • SuperMAC was licensed by Sony to Midas for the XL8 digital console project • SuperMAC was purchased by Klark Teknik in 2007.
What kind of cable do I need for SuperMac?
SuperMAC can be transmitted over standard unscreened Cat 5 cable for short distances. For longer distances, up to 100 metres (the maximum specified by the IEEE 802.3 Ethernet standard for twisted-pair copper cables), the use of high-grade Cat 5e cable is recommended.
What is the AES standard for digital audio?
AES50 is an Audio Engineering Society open standard defining the bidirectional transmission of multichannel digital audio over 100 Mbit/s CAT 5/5e cable AES50-2005. AES standard for digital audio engineering – High resolution multi-channel audio interconnection (HRMAI).
Who is the owner of the SuperMac Technology?
SuperMAC is a proprietary technology that provided the basis for the AES50 standard. Originally developed by Sony Pro-Audio Lab in Oxford, England, it is now owned by the Klark Teknik brand of the MUSIC Group.