What is a 20 to 1 dilution?

What is a 20 to 1 dilution?

Lets do a dilution ratio of 20:1. We add the ratio numbers: 20+1 and this gives us 21. Then we divide 128oz by 21 and that gives us 6.09 ounces of chemical and the rest would be the water for a total of 128oz.

What is the ratio of 2 stroke fuel to oil?

When mixing 2 stroke (2 cycle) fuel the mixture is expressed as a ratio of fuel to oil. For example to mix 50:1 you use 50 parts fuel to 1 part oil, which equals one litre of fuel to 20 millilitres of oil or 1 gallon of fuel to 2.56 fluid ounces of oil.

What kind of fuel ratio do you need for a dirt bike?

E.g You want to mix your fuel at 40:1 and you have 8 liters of gas. How much oil should you use? 8 liters of petrol = 8000 mls / 40 = 200 mls.

What’s the fuel ratio on a Suzuki YZ 250?

My YZ 250 runs at 32:1 which is what’s written in the owners manual. If you don’t have an owners manual, consult your local (Suzuki, Yamaha, KTM etc) dealership and ask them.

What’s the best premix ratio for a two stroke engine?

A good rule of thumb of 7% for older premix twostrokes. The following is extracted from the Villiers forum, and is applicable to most twostrokes built before the mid-1960s. As far as premix goes the 16:1 is still correct for running in a new engine and you can then cut down to 20:1 thereafter.

What’s the ratio of oil to gas for a dirt bike?

A ratio of 20:1, which is 6 oz of oil in a gallon of gas, will make the bike run noticeably leaner than a ratio of 40:1, which is 4 oz of oil to a gallon. Personally, and I think other really intelligent people agree that it makes sense to mix a gallon of gas at say 20:1, 32:1 and 40:1 and test it and see which blend makes you bike run better.

What should the two stroke gas oil ratio be?

Two Stroke Gas/Oil Ratios. One of the things you should do, is run high octane gas with any two-stroke mix. When all of the two strokes (the old days) were developed, they all used Castrol petroleum oil at a 20:1 ratio and found that 92 octane gas had the octane reduced to 72 with presence of that much oil.

What kind of gas should I put in my motorcycle?

All gasoline is not created equal. Photo by Kenneth Stone. So there’s a short answer and a long answer to the question asked in the title of this article. The short answer is, “Use whatever the manufacturer of your engine recommends. Fuel of that rating will give the best performance and economy at the lowest price.”

What’s the best fuel mix for a two stroke boat?

There are a few good reasons to run a fuel/oil mix at ultra thin ratios in a two stroke. High ratios such as 100 to 1 are usually environmental reasons, such as for outboard boat motors. The exhaust of an outboard motor goes directly into the water, and environmental­ists are worried about the oil in the mix polluting the lakes and rivers.