What does adding a sway bar do?
Sway bars improve a car’s handling around turns and corners by controlling the vehicle’s weight transfer, including body roll. By working to keep the wheels on each side of the car as even as possible, they help keep the car more planted and maintain a strong contact patch between the tires and the ground.
Can you install a sway bar?
In most cases, installation is quite simple. If the vehicle came from the factory with sway bars already in place, all the guess work is done for you.
Do sway bars make a difference?
Although an anti-roll bar’s main function is to reduce body roll in cornering, it also influences overall handling. You can fine-tune Over- or Understeering with them.” Besides the performance associated with not having as much body roll, sway bars also improve the weight distribution amongst all four tires.
What are the links on a sway bar?
Be sure it is installed the same as the original – the bushings are touching the sway bar – from the top: nut, metal washer, bushing, sway bar, bushing, metal washer. The lower link is simply nut, mounting point, smaller nut.
How does an anti sway bar work on a car?
The stiffer the anti-sway bar is, the more the compressing force on the outside of the car is transferred across the chassis, helping keep the inside suspension loaded and increasing its contact patch. In other words, an anti-sway bar helps redirect the load being forced onto one side…
How much does it cost to replace a sway bar?
Typically, a car requires new sway bar end links or stabilizer bushings. A replacement sway bar end link will cost between $125 and $160, with labor making up $50 to $70 and the part costing between $55 and $110. The stabilizer bushing replacement cost is between $125 and $160, with labor making up $95 to $120 and the part costing $30 to $65.
Can you remove the nut from a sway bar?
Remove the nut holding the sway bar link to the sway bar. You will have to grip the shaft below the sway bar so it does not turn – for example pair of vice grip locking pliers.The bottom bolt you can use a socket wrench on the nut, and a wrench on the nut on the other side of the mounting point (see picture). Install the new link.
Where are the sway bars on a car?
Sway bars are usually located at the front of the car and are bolted to the suspension on your vehicle. Depending on the make and model of your car, you may have only front sway bars links, or front and rear sway bar links.
What happens when a sway bar link goes bad?
The sway bar link is a suspension component that connects the sway bar to the suspension and chassis. When sway bar links go bad or the bushings tear they can cause everything from rattles and clunks when going over bumps to excessive leaning of the vehicle during turns.
What should I do if I have a bad sway bar?
Once you have applied ample grease to all the joints, take the sway bar back to where it belonged. Reattach the struts, springs and follow up by tightening them in place. Put on the tire and wash your hands. Sway bars are easy to test, as all you have to do is drive your car.
Typically, a car requires new sway bar end links or stabilizer bushings. A replacement sway bar end link will cost between $125 and $160, with labor making up $50 to $70 and the part costing between $55 and $110. The stabilizer bushing replacement cost is between $125 and $160, with labor making up $95 to $120 and the part costing $30 to $65.