What do you need to know about steering control?
Steer the car through at least five left and right 90-degree turns, maintaining the correct lane position if on a road Turn the steering wheel back to the centre each time rather than letting it slip back by itself – this allows you to maintain control
Is there no communication with the steering control module?
The MVBs showed no communication with the steering control module or the generator. For the Generator I tried both [19 – CAN Gateway], Group 6 and [01-Engine], location [134] with the same results. Here is the log:
Why are my steering wheel controls not working?
Could be just a loose connection, the connector may have jumped out. I’d start by removing the under-trim and re-seating the cables. The fuse box is in the left edge of the dash, the owners manual will tell you which fuse to check… that is, if the wheel controls actually use a fuse.
How to hook up steering wheel control to aftermarket radio?
Universal “2 or 3 wire” radio: Connect the steering wheel control wire, referred to as Key-A or SWC-1, to the Brown wire of the connector. … For all other radios: Connect the 3.5mm jack into the jack on the aftermarket radio designated for an external steering wheel control interface.
Steer the car through at least five left and right 90-degree turns, maintaining the correct lane position if on a road Turn the steering wheel back to the centre each time rather than letting it slip back by itself – this allows you to maintain control
What does it mean when your power steering is not working?
A drop in your power steering fluid level indicates a leak somewhere in the system. Check the hoses, seals, and the hydraulic pump for any signs of leaks to avoid draining the fluid. Loss of power steering fluid can damage the hydraulic pump and cause problems in your steering.
The MVBs showed no communication with the steering control module or the generator. For the Generator I tried both [19 – CAN Gateway], Group 6 and [01-Engine], location [134] with the same results. Here is the log:
What to do if there is no steering on your car?
Fix or send the servo back to Traxxas for repair. If you hear the servo responding to steering input and the servo output shaft is turning, check the linkages for damage or disconnection. If the servo saver is loose or damaged repair or replace it as necessary. Return the component to Traxxas for service.