What causes the p0243 code on a WasteGate turbocharger?
The turbocharger wastegate solenoid is shorted or has an open in the solenoid. The solenoid connector is corroded, causing an open circuit. The wiring in the solenoid circuit is shorted to power or ground, or open circuit from a broken wire or connector. What are the symptoms of the P0243 code?
What happens when wastegate solenoid malfunctions on turbocharger?
The turbo boost pressure in the intake is controlled with the wastegate and wastegate solenoid on most vehicles with a turbocharger. If the solenoid is malfunctioning, then the ECM cannot enable and control the turbo boost, often resulting in a lack of power. What repairs can fix the P0243 code?
What does fault code p0243 in OBD II mean?
What Does Code P0243 Mean? OBD II fault code P0243 is a generic code that is defined as “Turbocharger (TC) wastegate regulating valve “A” – circuit malfunction, and is set when the PCM (Powertrain Control Module) detects a malfunction in the control and/or signal circuit of the valve that regulates the operation of the turbocharger wastegate.
What is the OBD code for wastegate solenoid?
P0242 is a generic OBD-II code indicating that the Engine Control Module (ECM) detected the turbocharger wastegate solenoid has an open or short circuit.
What does the OBD code p0243 mean?
What the P0243 code means. P0243 is a generic OBD-II code indicating that the Engine Control Module (ECM) detected the turbocharger wastegate solenoid has an open or short circuit.
What causes a p0033 problem on a turbocharger?
Common mistakes when diagnosing the P0033 code The most common mistake for this code is related to assuming that basic components are operating normally. Commonly, this issue is related to intake leaks, after the turbocharger to the intake throttle valve. Often there is just a hose or clamp loose which is causing a loss of pressure.