What causes p0715 Mercedes-Benz transmission speed sensor to malfunction?

P0715 MERCEDES-BENZ Possible Causes 1 Faulty Transmission Speed Sensor 2 Transmission Speed Sensor harness is open or shorted 3 Transmission Speed Sensor circuit poor electrical connection More …

What does it mean when your transmission says p0720?

You are experiencing transmission problems. You press the gas pedal, and the engine RPMs go up to 4000 or even higher and you are limited to a max speed of about 30 MPH. The check engine light (CEL) comes on. You scan the car using an OBD-II code reader, and you get fault codes such as P0715, P0720, P0700.

What does DTC code p0715 stand for?

Diagnostic Trouble Code (DTC) P0715 is detected when TCM or ECM does not receive the proper signal from the input/turbine speed sensor. Quick Tip If you need to get home, try turning off the car. Remove key and wait a couple of minutes then restart the car.

What is the fault code on a Mercedes?

You press the gas pedal, and the engine RPMs go up to 4000 or even higher and you are limited to a max speed of about 30 MPH. The check engine light (CEL) comes on. You scan the car using an OBD-II code reader, and you get fault codes such as P0715, P0720, P0700.

What does the code p0715 mean on a transmission?

Code P0715 is triggered when the Engine Control Module (ECM) or Transmission Control Module (TCM) detects an irregular signal coming from the input/turbine speed sensor in the transmission. The input/turbine speed sensor is used to measure how many revolutions per minute (RPM) the input shaft of the transmission is turning.

P0715 MERCEDES-BENZ Possible Causes 1 Faulty Transmission Speed Sensor 2 Transmission Speed Sensor harness is open or shorted 3 Transmission Speed Sensor circuit poor electrical connection More

What is the error code for a Mercedes 5 speed transmission?

Here is a list of Mercedes 5-speed and 7-speed automatic transmission related error codes. P0700 – Transmission Control System Malfunction (Generic Code telling you there is a gearbox problem) P 0716 P0717 P0718 – Input / Turbine Speed Sensor Circuit Malfunction / Range Performance / No Signal / Intermittent

How does input speed sensor set OBDII code?

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module ( ECM ). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications. Need more information on how to fix the P0715 MERCEDES-BENZ code? Need more help?

What kind of transmission problem does a Mercedes have?

P 0716 P0717 P0718 – Input / Turbine Speed Sensor Circuit Malfunction / Range Performance / No Signal / Intermittent All these fault codes point to powertrain malfunction, typically automatic transmission problems. In most cases the problem is one of the following:

How to replace the speed sensor on a Mercedes?

4 ush in new sensor do up the 10mm bolt see pics. 5 now you have a working speedo. Its the speed sensor you need to replace not the clocks how many people have changed the clocks and still no speedo. Great work, mate:thumbsup:Your diagnosis will save a lot of grief and legal tender for others.

Diagnostic Trouble Code (DTC) P0715 is detected when TCM or ECM does not receive the proper signal from the sensor. The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module ( ECM ).

Can a Mercedes-Benz ML320 read fault p0715?

My ML320 read the same fault P0715 with a new Conductor plate with new sensors. may be someone can help. As you can see by the chart below, code P0715 has four subgroups. Without a professional grade scanner to read the manufacturer’s precise code (to the left of any P0715 code) it is pure guess work.

Where to find Mercedes-Benz transmission code p0715?

As you can see by the chart below, code P0715 has four subgroups. Without a professional grade scanner to read the manufacturer’s precise code (to the left of any P0715 code) it is pure guess work. The first thing to check is the 13 pin connector on the passenger side of the transmission.

What to do if you get an error code p0715?

Without a professional grade scanner to read the manufacturer’s precise code (to the left of any P0715 code) it is pure guess work. The first thing to check is the 13 pin connector on the passenger side of the transmission. Separate the connector and see if there is trans. fluid. If there is, then a $20 repair kit is available.

What causes a p0715 OBD-II to malfunction?

A P0715 usually has one main cause and other secondary issues that are less common. These include: Faulty transmission speed sensor. Faulty or damaged speed sensor wiring. Faulty speed sensor electrical connection. Faulty shift solenoids. Damaged transmission valve body.

What does the p0715 code on a car mean?

What the P0715 code means. P0715 is an OBD-II generic code for a signal error between the engine control module (ECM) and the automatic transmission control module (TCM).

Is there an AAMCO code for a 2002 C240?

I had the same problem with my 2002 C240 (code P0715) I took the car to AAMCO and they replaced my TCM, harness and trans oil all for $1000. The car was running fine untill a few more months later I’m back to being in “Limp Mood” I have no idea what to do next!

How to check Mercedes Benz SLK 230 reading fault codes?

Before plugging the scan tool into the car’s diagnostic port, make sure that the car’s battery has at least 11.4 volts with the key off and that the battery cables are clean and secured to the terminals. Plug the scan tool into the data port and turn the ignition on. For other details, refer to the scan tool’s owner’s manual.

Navigation