What are the trouble codes on a Freightliner M2 106?
Can anyone decode a Freightliner M2 106 w/MBE 900 trouble codes SID 025 & FAIL 07 ?? You have only posted 2/3 of the code. bh 164, trucks not starting, like its losing its prime…
Is the ecu128 code the ABS or the engine?
They are not fault codes, they are module identifiers. ECU128 is the engine ECU, ABS136 is the ABS. You should be able to toggle to another screen to give SID/PID and FMI #’s. Without that, I all can tell you is that you have an engine and an ABS fault.
Are there any fault codes for Mercedes engines?
Any ideas on any of these fault codes, I’ve done all the research I can on them and have had no luck whatsoever. Every month 400 people find a job with the help of TruckersReport. Please Select… I Need CDL Training In CDL School Now CDL Grad, No Experience 1-5 Months 6-11 Months 1 Year 2 Years 3 Years 4 Years 5+ Years
They are not fault codes, they are module identifiers. ECU128 is the engine ECU, ABS136 is the ABS. You should be able to toggle to another screen to give SID/PID and FMI #’s. Without that, I all can tell you is that you have an engine and an ABS fault.
Can anyone decode a Freightliner M2 106 w/MBE 900 trouble codes SID 025 & FAIL 07 ?? You have only posted 2/3 of the code. bh 164, trucks not starting, like its losing its prime…
Where can I find the Mercedes Fault code?
Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes. The codes above are retrieved by plugging a diagnostic scanner into the OBD-II port located under the dash, and scanning for fault codes. Location of OBD II port used to retrieve Mercedes-Benz fault codes.
What are the diagnostic codes for Mercedes Benz?
Mercedes-Benz Diagnostic Trouble Codes (DTC) for 1996+ models Powertrain P0100 Mass or Volume Air Flow Circuit Malfunction P0101 Mass or Volume Air Flow Circuit Range/Performance Problem P0102 Mass or Volume Air Flow Circuit Low Input P0103 Mass or Volume Air Flow Circuit High Input P0104 Mass or Volume Air Flow Circuit Intermittent
What are the fault codes for Freightliner engines?
Engine Fault codes (MID, PID, SID, FMI) FREIGHTLINER. Component Codes (MID) MID / Description / Old Text Message / New Text Message * 128 Engine # 1 ENGINE ENG 130 automatic transmission – † Trans 136 Anti-lock Brake System (ABS) TRCTR BRK Brake 140 Panel, Left INSTRCLST Instr 142 Panel, Right # 1 INSTRCLST MGMT 172 Diagnostic System DIAGNOSTC DIAG
When did the mid code go out for Freightliner?
* On March 7, 1997. If there is no text message, the display area will be blank. Only the MID number will display. * On March 7, 1997. * On March 7, 1997. * On March 7, 1997. 154 Auxiliary IN / OUT Status # 2 AUX INP / OUTP # 2 Aux. In / Out # 2 155 Auxiliary IN / OUT status # 1 AUX IN / OUT # 1 Aux.
When did the SID number go blank on Freightliner?
If there is no text message, the display area will be blank. Only the SID number will display. * On March 7, 1997. If there is no text message, the display area will be blank. Only the SID number will display. * On March 7, 1997. If there is no text message, the display area will be blank. Only the SID number will display. * On March 7, 1997.
What to do if the cooler fails on a Freightliner 4000?
No downsides at all, and will ensure that the O ring in the cooler never fails again, if it has failed up to yet, dumping coolant into the cylinders. On the 4000’s, you remove the small tube that bolts to the exhaust manifold and the EGR cooler solenoid.
What to do if your Freightliner has a trouble code?
If there are no further codes, I would make sure the fuel filter is a detroit diesel/ mercedes part. I would also check under the cab to see if there is an inline fuel filter in the plastic fuel line, and change it or eliminate it.
What makes a Freightliner engine hard to start?
It’s probably not an injector, but fuel loss from one of the high pressure pipes can make them hard to start. look for fuel leaks on the driver’s side of the engine.
Which is the SID number for Freightliner 7?
Only the SID number will display. 7 ABS modulator, 1st Axis, Left (front) PRSMOD VLV A1L Mod. Valve a1l 8 ABS Modulator, 1st Axis, Right (front) PRSMOD VLV A1R Mod. Valve a1r 9 ABS modulator, 2nd Axis, Left (middle) PRSMOD VLV A2L Mod.
What are the maintenance schedules for a m2 truck?
Maintenance Schedules: 00–02 Maintenance Intervals for Schedule I: 00–03 Maintenance Intervals for Schedules II and III: 00–04 Overview of Maintenance Operations: 00–05 Initial Maintenance (IM) Operations: 00–06 M1 Maintenance Operations: 00–07 M2 Maintenance Operations: 00–08 M3 Maintenance Operations: 00–09
What are the ISC codes on a Cummins Engine?
Client called in, and he had codes 3712 & 3714 active on his Cummins ISC engine. These codes are also used with other Cummins engines, and the procedure is the same. The customer had some other codes that were active previously, and had already fixed the problem.
Is there a fault code reader for Freightliner Trucks?
This Heavy Duty code reader for Freightliner trucks enables you to read and erase the fault codes that relate to the check engine light on your truck. It will work with your specific truck as listed in the drop down boxes above, so please select.
Is the Freightliner stop engine and check engine light coming on?
He sent the truck to Freightliner, and sure enough he was correct. This is a Detroit Engine, by the way. My check engine and stop engine light is coming on while driving. Flashes a few times then stays on for about 30 seconds but the engine doesn’t die.
Where are the fuel filters on a Freightliner truck?
Freightliner used to bury them under there on the business class trucks. I would make sure both fuel filters on the engine have been changed, the strainer and the filter.
Where is the intake heater on a Freightliner?
It **might** have an intake heater. It would be on the air intake pipe going in to the engine and have a couple of 2 gauge or so cables gojng to it. either way that shouldn’t make a difference to starting at this time of year.
What’s the bh33 code on my freight liner m2?
Get back to the diag message. Tried with key on and off and with the engine running. Still get the bh33 message. Click to expand… I have the same bh33 code and also with the dish button proceeded and found 6918 and 6920. Still connected with my diagnostic pad and it’s telling me I’m missing a smart switch.
What does the dashboard say on a Freightliner M2 cat C7?
Freightliner M2 Cat C7 engine. Dashboard says 3_2.2 and after bh164 code. Can somebody tell me what that meens? Freightliner M2 Cat C7 engine. Dashboard says 3_2.2 and after… I have a 2006 Freightliner M2 Cat C7. I had an oil leak and I have a 2006 Freightliner M2 Cat C7. I had an oil leak and could not find the actual leak.
What kind of engine does a Freightliner M2 have?
Vocational, Technical or Tra… Im working on a 09 Freightliner m2 with a c7 cat. Dies at idle. contol pressure was dropping from 2300 psi to 1300 it would die. Replaced pressure … read more
Where is the intake plate on a Freightliner 4000?
On the 4000’s, you remove the small tube that bolts to the exhaust manifold and the EGR cooler solenoid. I welded a circular plate in there and reinstalled it to make it look OEM. I then plasma cut a plate to go between the intake tube and the EGR cooler. I bolts onto the intake manifold next to the heater on mine.