Should I replace my tires at 2 32?
In the United States, tire tread depth is measured in 32nds of an inch. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. …
Is 9/32 A good tire tread?
Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.
When to replace tires 5/32?
Additionally, if snow-covered roads are a concern, you should consider replacing your tires when they reach approximately 5/32″ of remaining tread depth to maintain good mobility. You need more tread depth in snow because your tires need to compress the snow in their grooves and release it as they roll.
Can You Drive on 2 / 32 inch of tread?
You have a good chance of losing control of the vehicle if it hydroplanes on the water, and 2/32 does not leave much room for the tires to not hydroplane. Rain or shine, I would never drive on tires with 2 / 32nds of an inch of tread.
What’s the difference between 2 / 32 and 4 / 32 deep tires?
The differences surprised us! Vehicles equipped with the 2/32″ minimum tire tread depth took about 100 more feet to stop and were still traveling at about 45 mph at the same distance the vehicles equipped with the 4/32″ deep tires had already come to a complete stop!
What does 7 / 32 mean on a tire tread?
Another said the 7/32 means they’re still good but there’s wear. When a tire is brand new, is it 7/32? Or 32/32? My first pair of tires were bald (so I was told) by the time the car (a Honda Civic ’99) was only two years old. I did mostly highway driving back then.
Additionally, if snow-covered roads are a concern, you should consider replacing your tires when they reach approximately 5/32″ of remaining tread depth to maintain good mobility. You need more tread depth in snow because your tires need to compress the snow in their grooves and release it as they roll.
What’s the tread life of 5 / 32 ” tires?
To me, 5/32″ equals 5/6 of useful tread life (6/32″) used up and 1/6 (17%) remaining. Given the fact that tires become oxidized and lose traction with age, and in view of approaching winter, the safe and sane choice is new tires, hopefully with better characteristics than OEM. Click to expand… Absolutely ….
The differences surprised us! Vehicles equipped with the 2/32″ minimum tire tread depth took about 100 more feet to stop and were still traveling at about 45 mph at the same distance the vehicles equipped with the 4/32″ deep tires had already come to a complete stop!
How much tread is left in a half tread tire?
What We Found. For tire geeks, a half-tread depth tire has typically 5/32- to 6/32-inch of tread depth remaining. Tires are worn-out when they reach 2/32-inch, but as the chart below shows, you don’t need to go that low to see a substantial decline in performance on slick (wet, snowy or icy) surfaces.