Is your throttle cable supposed to be loose?
The tightness of the accelerator, or throttle, cable on any vehicle is important. If the cable is tightened too much, the car will not idle properly and consume fuel quickly. If the cable is too loose, the car will respond slowly when you press the gas pedal.
How do you tighten the throttle valve cable?
Keeping the cable relaxed, push in the D button with a screwdriver. When the D button is pressed, the cable housing can be moved closer to the throttle bracket to tighten the cable or further away to loosen it. Note: Make sure that the gas pedal is not being depressed while you are making the adjustments.
Where does the throttle valve cable come from?
Average rating from 123,882 customers who received a Adjust Throttle Valve Cable. Many cars with automatic transmissions use a mechanical cable that runs from the transmission to the throttle linkage. This throttle valve cable is responsible for controlling the throttle lever providing movement to the car.
How to test the tautness of the throttle linkage?
Have your helper sit in the driver’s seat and push the gas pedal to the floor. You will see the throttle linkage move all the way in one direction. This is called wide open throttle (WOT). Now with the throttle wide open, test the tautness of the throttle linkage.
Where do you find the throttle linkage on a Honda Accord?
Step 2: Locate the throttle linkage. Before you can make any adjustments, you will need to locate the throttle valve adjustment location and the throttle linkage. Pop the hood and look for the intake piping. Follow the piping to the intake itself. You will find a series of linkages and cables mounted on the intake.
Keeping the cable relaxed, push in the D button with a screwdriver. When the D button is pressed, the cable housing can be moved closer to the throttle bracket to tighten the cable or further away to loosen it. Note: Make sure that the gas pedal is not being depressed while you are making the adjustments.
How do you change the throttle grip on a Harley?
adjust the throttle cable adjuster so that the throttle body butterflies hit the wide open stop just as the throttle grip reaches wide open throttle (WOT). snug the lock nut on the throttle cable adjuster. adjust the idle cable adjuster to remove excess slack from the throttle grip, but not so tight as to cause the grip to bind.
What happens when the throttle valve cable is out of specification?
When the throttle valve cable is out of specification, the transmission can shift early, shift late or not shift at all. Before the throttle valve cable can be adjusted, the transmission must be in good working order. First, you will need to find out if the transmission is faulty or if the transmission just needs to be adjusted.
How do you take off the throttle on a lawn mower?
Turn off the mower. Take off the old throttle cable of your lawn mower by removing the cable housings with a pair of pliers or twisting off the screws using your bare hands. This action will remove the housings off the base, allowing it to go down the cable.