Is the start button connected to the ignition system?
The Start button does NOT supply power to the ignition system. The Start button simply causes the starter motor to crank the engine. Note: Prior to 2000 the CDI was factory configured with direct connection to battery power.
What is the hold on contact on a direct on line starter?
Therefore, contact A is known as Hold-On-Contact. The stop button S 2 is normally held closed by the spring. If the S 2 button is pressed to STOP the motor, the supply through the contactor coil C is disconnected. As the coil C is de-energized, the main contacts M and the auxiliary contact A are opened.
How is a motor connected to a starter?
The motor is connected through a starter across the full supply voltage. The Direct On Line Starter Method figure is shown below. It consists a coil operated contactor C controlled by start and stop push button as shown in the connection diagram below. The buttons which may be installed in a convenient place away from the starter.
What makes a direct on line starter start?
In direct on line starting the starting current may be as large as ten times the full load current, and the starting torque is equal to full load torque. Such a large starting current produces an excessive voltage drop in the line which supplies power to the motor.
What happens when the starter button is disengaged?
The start button has disengaged, and the drive gear has returned, but the starter continues to rotate. The start button is disengaged, the starter continues to rotate, but the drive gear can not reverse.
The Start button does NOT supply power to the ignition system. The Start button simply causes the starter motor to crank the engine. Note: Prior to 2000 the CDI was factory configured with direct connection to battery power.
What happens when you turn on the starter solenoid?
When turn on the ignition switch and the starter circuit is turned on, the electric current flows to Starter Solenoid and create the electromagnetic force.
Why does my Ford starter keep running even after I Turn Off the engine?
Some Ford owners encounter a situation where the starter run continuously or keeps running even after the engine has started and even after they’ve removed the key from the ignition. At first, this may make you think the starter drive is binding. Or you may think you have a bad starter relay.