Is a 2001 Ultra Classic fuel Injected?
Its power source is the Twin Cam 88™ engine, glittering with chrome and fed by sequential port fuel injection, standard.
How much does a 2001 Harley Davidson Ultra Classic weigh?
2001 Harley-Davidson Electra Glide Ultra Classic specifications, pictures, reviews and rating
| General information | |
|---|---|
| Weight incl. oil, gas, etc: | 385.0 kg (848.8 pounds) |
| Seat height: | 692 mm (27.2 inches) If adjustable, lowest setting. |
| Wheelbase: | 1612 mm (63.5 inches) |
| Fuel capacity: | 18.90 litres (4.99 gallons) |
Why is my Harley Davidson Ultra Classic not starting?
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
What are the problems with a Harley Davidson starter?
Harley Davidson Common Starter Problems Summary and Fixes – YouTube There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a Skip navigation Sign in Search Loading…
Where is the starter button on a Harley Davidson?
Move the voltmeter’s red probe to the solenoid’s power input terminal, located on the top of the starter solenoid. Turn the ignition switch on and shift the motorcycle into neutral. Flip the engine stop switch, located on the right handlebar, into the “Run” position, then push the starter button for two seconds.
What do you need to start a Harley Davidson?
The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
What’s the voltage on a Harley Davidson starter?
I check the voltage at the kill switch and get 12.3 from the black and white wire that goes to the kill switch and the start button. But, I only get 9.2 volts from the black and red wire from the start switch to the start relay. All the fuses are good and there are 12 volts to the starter and the solenoid.
The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.
Where is the start relay on a Harley Davidson?
It is the GRAY one. On the inside cover there is a label that will identify the START Relay. 4) Look at the bottom of the removed gray relay closely. You will see pin notation as follows. 87,,87A,,30,,85,,86. 5) Leave the relay REMOVED from the bike.