How to stop the power window on a Kia Sorento?
To stop the window at the desired position while the window is in operation, pull up or press down and release the switch. If the power window does not operate normally, the automatic power window system must be reset as follows: 1. Turn the ignition switch to the ON position. 2.
When to use auto reverse on Kia Sorento?
And if the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reversal feature, the automatic window reversal will not operate. The automatic reverse feature for the driver’s window is only active when the “auto up” feature is used by fully pulling up the switch.
What should you never do in a Kia Sorento?
Never try to operate the main switch on the driver’s door and the individual door window switch in the opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed. NEVER leave the keys your vehicle with unsupervised children. when the Engine is running.
How can I reduce the noise in my Kia Sorento?
This noise is a normal occurrence and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly reduce the size of the sunroof opening.
Is the Kia Sorento power window switch genuine?
We offer a full selection of genuine Kia Sorento Power Window Switches, engineered specifically to restore factory performance. Please narrow the Electric Window Switch results by selecting the vehicle. Item has been added to your cart! This part contains hazardous material.
Where are the power windows on a Kia?
Motors mounted in each door panel operate the four power windows in a Kia automobile. The driver’s side armrest also contains separate switches for the passenger windows, plus a child lockout switch that disables the electronic control of the passenger windows.
What should I do if my Kia window is not working?
Remove the door panel under the malfunctioning window, if the window does not work with either switch. You need to access the motor. With a voltmeter, measure the voltage at the motor while operating the window switch. The voltage should be approximately 12 volts across the motor.