How to reset the Toyota maintenance required light?
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.
How to turn off the maintenance required light?
The maintenance required light should begin flashing on your dashboard. Continue to keep the button pressed until the light goes away from your dashboard. Pressing the reset button for more than 20 seconds is necessary for this technique to be successful.
How do you reset the maintenance light on a Toyota 4Runner?
If your car has START push-button, press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off. This tutorial we got from Toyota 4Runner owner’s manual.
What’s the best way to reset a check engine light?
In such a case, it is highly recommended to check the codes with a scanner instead. Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step.
How do I Reset my maintenance required light?
Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds.
How do you reset the maintenance required light on a Prius?
2015-2020 Prius (OIL RESET) Maintenance Required Indicator Reset STEP 1. Push the START BUTTON, don’t start the ENGINE (Accessory Mode Only) STEP 2. First Clear the System message by pressing the BACK Button on Driver Info Button.
How do you reset maintenance light Toyota Camry?
Follow these few simple steps to reset maintenance light Toyota that is not a Camry or Prius: Put the ignition key into the slot and turn on the car without kicking off the engine. The odometer should read ‘Trip A’. If it does not, press down the ‘Reset’ or ‘Trip’ button until the reading on the odometer displays ‘Trip A’.
How does the maintenance light work on a Toyota?
Most Toyota models these days have an electronic computer system that has a connection to the ‘Maintenance Required’ lights on the dashboard along with many other components. Whenever the computer detects a malfunction or a problem in the engine, it will set off the related service light.
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.
Why does my Toyota maintenance light keep flashing?
The Toyota maintenance light relies entirely on the odometer counting those 5,000 miles, so it has no way of detecting if you changed the oil in the meantime. That’s why this light can become annoying if you just changed your oil and it flashes on your dashboard reminding you to do it.
How do you reset the odometer on a Toyota?
While still pressing the button, turn your keys clockwise enough to turn your vehicle on but not far enough to start it. Keep pressing the button while watching the odometer. It should flash and/or display zeros before reappearing as normal. You can now release the trip reset button and the Toyota maintenance required light should be off.
How to reset the trip a on a Toyota?
Do not go as far as to start the engine. Step 2: Make sure the “Trip A” is reading on the odometer. If it is not, depress the “Trip” or “Reset” button until the odometer reads “Trip A.” Step 3: Press and hold the “Trip” or “Reset” button.
What happens when you reset the maintenance required light?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
How long does it take to reset a Toyota Corolla Minder light?
Time needed: 7 minutes. When engine oil needs to replace, the MAINT REQD message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle.
If your car has START push-button, press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off. This tutorial we got from Toyota 4Runner owner’s manual.