How to reset pinch sensor saab?
Calibration of pinch protection Procedure
- Close the window. (Saab Convertible: Close the door and soft top.)
- Open the fuse box.
- Start the car.
- Lower the window fully.
- Raise the window fully.
- Lower the window fully.
- Raise the window fully.
- When calibration has been completed an audible confirmation is heard.
How do I close the window on my Saab 9-3 / 9-5?
Raise the window fully. Hold the button up during the entire operation. Wait for at least 1 second when the window is in the top position. 6. Lower the window fully. Hold the button depressed during the entire operation. 7. Raise the window fully. Hold the button up during the entire operation.
How does window calibration work on a Saab 9-3 convertible?
HOME | RIDES | PRACTICAL | SAABS | DRAMA | MUSIC | APPS | OTHER | WORLD MAP Sunday, April 24, 2011 Window calibration in Saab 9-3 convertible Situation :the front windows are not closing completely. After they come up, they go 30% again down while the soft-top roof is up.
Can you change the switch pack on a Saab 9-3?
No, this is not possible. The 2002 9-3 and 9-5 were fitted with a switch pack assembly housed in the center console which was a single unit. From 2004 onward the switch setup was totally changed with the DDM (Driver Door Module) type switches.
Is it possible to reprogram a Saab power window?
Reprogramming is a complex process but, when asked, a Saab Expert will provide step-by-step instructions. Saab power windows are a significant boon but can also be problematic if they begin to fail. Power window issues can generally be self-repaired if one has sufficient knowledge about how they operate.
No, this is not possible. The 2002 9-3 and 9-5 were fitted with a switch pack assembly housed in the center console which was a single unit. From 2004 onward the switch setup was totally changed with the DDM (Driver Door Module) type switches.
Raise the window fully. Hold the button up during the entire operation. Wait for at least 1 second when the window is in the top position. 6. Lower the window fully. Hold the button depressed during the entire operation. 7. Raise the window fully. Hold the button up during the entire operation.
Why are my windows not working on my Saab?
Generally, when the windows do not respond to the switches it is a switch-related issue for which the switch will need to be bypassed. To isolate the switch, pry it gently out of the center console with a small flat-blade screwdriver. Once the switch is out it can be unplugged.
Where are the switches located on a Saab power window?
No, this is not possible. The 2002 9-3 and 9-5 were fitted with a switch pack assembly housed in the center console which was a single unit. From 2004 onward the switch setup was totally changed with the DDM (Driver Door Module) type switches. These consist of both a microprocessor and switch which is located in the driver’s door.