How to enter fourth digit of code on Harley Davidson FOB?
9 Press right turn switch 1 time. 10 Enter fourth digit of code (1) by pressing left turn switch 1 time. 11 Press right turn switch 1 time. 12 Enter fifth digit of code (3) by pressing left turn switch 3 times. Security lamp stops blinking and the odo- System is disarmed.
Can a key fob be used to start a bike?
You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.
What to do if your Harley key fob is lost?
If your Harley key FOB is ever lost, damaged, or stolen, you can easily assign a new key FOB to your Harley. It is also possible to have two FOBs assigned at once. Bob demonstrates the assignment sequence in this video. The process is beyond simple.
How do you start a HD without a fob?
Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window. 2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times. 3. Press the right turn signal switch 1 time to move to the next digit. 4.
When to disarm a Harley Davidson key fob?
The system automatically disarms when the fob is within a certain distance of the receiver and arms when it is not. It’s nice in theory because it’s hands-free, but it is also “forced” on you. The first thing you should do is change the battery in the fob. It is a 2032 3 volt that you can buy just about anywhere.
What to do if FOB does not recognize Battery?
A dealer can reset it for you, but I’m sure they are pretty proud of that service. Do not change the fob battery standing next to the bike, walk away from it far enough so that the bike can’t “see” the fob. You have to let the system reset itself and then walk up to the bike.
What should I do if my key fob won’t work?
Some cars can still detect dead key fobs this way in emergencies. If it’s a cold day, go indoors and warm up the key fob with your breath. Sometimes, the temperature can mess with the electronics. If you have a second key fob, try using it. This should at least show you if the problem is the key or the car.
You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.
9 Press right turn switch 1 time. 10 Enter fourth digit of code (1) by pressing left turn switch 1 time. 11 Press right turn switch 1 time. 12 Enter fifth digit of code (3) by pressing left turn switch 3 times. Security lamp stops blinking and the odo- System is disarmed.
Why does my car not start after I hold the key?
The only possible reason that the starter doesn’t operate after the engine is started and you hold the key in the start position is that there is a vacuum lockout that kills the current to the starter after engine starts and is producing vacuum.
When do I need to replace my Harley key fob?
If a code is not assigned or recorded and the Harley key FOB is lost or damaged while the vehicle is armed, the TSSM must be replaced. The TSSM code consists of five digits. Each digit can be any number from 1 to 9. The personal code must be used to disarm the security system in case the Harley key FOB becomes unavailable.
How to enter the pin number on a Harley Davidson?
Harley’s initial pin code number is, 3-1-3-1-3. How to enter an initial Pin. 1- select a 5 digit number and record it. (Owner’s manual is a good place) 2- with an assigned FOB present, set engine stop switch to off. 3- cycle ignition, on-off-on-off-on 4- press left turn signal 2X 5- press right turn signal button 1X 6- enter first digit of