How much transmission fluid does a Softail take?
The transmission fluid capacity is approximately 24 ounces (0.71 liters). Inspect o-ring for tears or damage. Replace if required. Wipe any foreign material from plug.
Is it necessary to change transmission fluid in Softail?
Aside from properly shifting gears, keeping fresh transmission fluid installed in your Softail is the best way to keep your transmission problem-free. The process is fairly simple and may save you hundreds when you do it yourself!
Where is the oil drain plug on a Softail?
On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing.
Where to drain transmission fluid on a Harley Davidson?
Locate the drain plug between the shocks on the bottom side of the transmission. It’s difficult to see and access, but with a 3/8″ ratchet, 6″-8″ extension, universal joint, and a 5/8″ socket, it can be removed. Place your drain pan underneath the bolt. Once the fluid is almost completely drained, level out the bike to remove any remaining fluid.
Where is the transmission drain plug on a Dyna?
Unscrew the transmission housing’s drain plug, using a 5/8-inch socket. On Softails, the drain plug is found between the rear shocks; Dyna and Touring models have drain plugs under the left side of the engine’s oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained.
How to change transmission fluid in a Harley Davidson Softail?
Use a 7/32″ Allen key or socket to start threading the plug, then switch to the 5/8″ socket. Final torque is 20 ft.-lbs. Figure 6. A small amount of metal shavings on the drain plug magnet is normal. Inspect the fill plug o-ring for damage and replace if necessary.
On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing.
Unscrew the transmission housing’s drain plug, using a 5/8-inch socket. On Softails, the drain plug is found between the rear shocks; Dyna and Touring models have drain plugs under the left side of the engine’s oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained.
What kind of oil does a 1999 Softail use?
The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of how to to change the motorcycle’s engine oil, due mostly to the apparent absence of an oil drain plug.