How do you turn off the engine on a Saturn Ion?
Turn the key to the off position without removing it and back to “Run” for 10 more minutes. Turn the key off again and back to “Run” for 10 minutes a third. Turn the key off and then attempt to start the engine.
How to reset a security system on a Saturn Ion?
To reset the system, get in the car and shut the door. Turn the key on to the “Run” position without cranking the engine. Leave the key there for exactly 10 minutes. Turn the key to the off position without removing it and back to “Run” for 10 more minutes.
How does the ignition lock work on a Saturn?
The ignition switch sends a code that is generated in the ignition lock to the body control module (BCM). It is a part of the Passlock2 system on the 2004 Saturn. The Passlock system is intended to prevent a worn (worn keys use to be about to start any of the earlier model Saturns without any security system) or incorrect key from starting the car.
How does the PASSKey System on a Saturn Ion work?
The PASSKEY system uses an exciter coil located inside the key lock tumbler that detects the correct key being inserted and turned to start the car. When the correct key is turned in the cylinder it sends a signal to the computer which will then allow the fuel injectors to function.
Turn the key to the off position without removing it and back to “Run” for 10 more minutes. Turn the key off again and back to “Run” for 10 minutes a third. Turn the key off and then attempt to start the engine.
What should I do if my car wont start?
When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine. These are the most popular ways to solve the problem of anti theft system car wont start.
To reset the system, get in the car and shut the door. Turn the key on to the “Run” position without cranking the engine. Leave the key there for exactly 10 minutes. Turn the key to the off position without removing it and back to “Run” for 10 more minutes.
Is it normal for the security light to go off when the engine is running?
After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed.
Is there an anti theft system on a Saturn Ion?
But most of today’s vehicles come equipped with an anti-theft system that is integrated into the vehicle’s computers. The 2007 Saturn Ion is one of them. The Ion uses two systems that provide different functions, but for the same purpose: to prevent theft.
The PASSKEY system uses an exciter coil located inside the key lock tumbler that detects the correct key being inserted and turned to start the car. When the correct key is turned in the cylinder it sends a signal to the computer which will then allow the fuel injectors to function.
But most of today’s vehicles come equipped with an anti-theft system that is integrated into the vehicle’s computers. The 2007 Saturn Ion is one of them. The Ion uses two systems that provide different functions, but for the same purpose: to prevent theft.
How to solve the anti theft system car wont start?
It is another way to solve the problem of anti theft system car wont start. Disconnect the positive terminal of the battery for a minute or two. Reconnect it and make sure that both the anode and cathode terminals are tightly attached. It will reset the computer system and your car is likely to kick off.
What to do if your car anti theft light is not blinking?
Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two. This gives the system time to reset or you won’t be able to start your car. Step 4: Start the engine. Attempt to start your engine.
How to reset ignition PassLock on a 2003 Saturn Ion 3?
If the Passlock system does not automatically reset, it can be reset manually. Turn the ignition key to the “Start” position as if you are starting the engine. Turn the ignition key to the “Run” position after two to three seconds. Leave the key in this position for 10 minutes.
Where is the ignition switch on a Saturn?
The problem was due to the original ignition switch which is a $50 part from Saturn. The ignition switch is located on the back end of the ignition lock. The ignition switch sends a code that is generated in the ignition lock to the body control module (BCM). It is a part of the Passlock2 system on the 2004 Saturn.
What does the PassLock system on a Saturn do?
The Passlock system is intended to prevent a worn (worn keys use to be about to start any of the earlier model Saturns without any security system) or incorrect key from starting the car. If the proper code is not sent then the BCM will shut down the car for up to 10 minutes.
What are the problems with my 2004 ion2?
Need some confirmation. Having intermittent starting problems with my 2004 ION2. Insert key, turn on, lights come on but no turnover. Sit a few minutes, turn on, tries to start but dies as if no gas, or get a turnover and that’s it. Sit another couple of minutes, turn on, lights, no turnover.
What to do if install does not start on its own?
If installation does not start on its own after inserting the Disc/Disc 1 in the drive, install the game manually: 1) Insert the Disc in your disc drive. 2) Go to your Start Menu > Computer (or My Computer in Windows XP). 3) Find the CD or DVD drive that contains the disc. Double-click to Open.
When does my Saturn’s series not start?
There is no consistency and it doesn’t matter if it is hot or cold, except it seems to happen more in the spring/summer (we live in Texas). It starts fine in the morning after sitting all night, then after school it won’t start. This will happen for several days in a row, then it will be fine for weeks & months.
Why does my Saturn 104k not start up?
My ’97 Saturn (104K) starts well in the morning. I drive home everyday about noon. When I try to start it, it cranks, and will eventually start, but it takes a good 8 to 10 seconds to get it going. The weather is hot when I have these problems, not sure if this has anything to do with it. Any thoughts?
Why does my 1996 Saturn SL2 not start?
The battery in my 1996 SL2 discharged because the car was sitting for several months unused (I know, I know — I should have disconnected the battery!). So I recharged it (pretty sure, anyway). Now the lights come on, etc. but when I turn the ignition the car cranks for about 1 second then stops cranking and there is a loud rapid clicking noise.
Why is my Saturn’s series making a clicking noise?
Now the lights come on, etc. but when I turn the ignition the car cranks for about 1 second then stops cranking and there is a loud rapid clicking noise. I’ve seen this symptom before in other cars but I can’t remember what they mean. Can anyone help?
Why is the ignition key stuck in my Saturn Ion?
New BTSI solenoid fixed my 2007 Saturn Ion when the key would not rotate out of the ignition lock cylinder after car was placed in Park. Thanks for the tip. I figured it had something to do with the car not registering that it was in park, because sometimes, I was able to get the key out by shifting the gears in and out of park several times.
Why is my Saturn SES light not working?
Close the Saturn’s hood. Until the Saturn’s problem is fixed, the SES light will reappear after a period of time. Your Saturn will be difficult to start and the idle will be rough after the battery has been disconnected. Once the computer relearns the required settings the car’s regular performance will return.
If the Passlock system does not automatically reset, it can be reset manually. Turn the ignition key to the “Start” position as if you are starting the engine. Turn the ignition key to the “Run” position after two to three seconds. Leave the key in this position for 10 minutes.
Need some confirmation. Having intermittent starting problems with my 2004 ION2. Insert key, turn on, lights come on but no turnover. Sit a few minutes, turn on, tries to start but dies as if no gas, or get a turnover and that’s it. Sit another couple of minutes, turn on, lights, no turnover.
Why is my ignition not working on my Saturn?
If there is a “click” when you try to crank the engine but the engine won’t start, the problem may be with the ignition key transponder. You will need to have both of these components serviced by a Saturn dealership. For specific information about your Saturn’s ignition system, consult the particular vehicle’s manual (see Resources).
What happens when you turn the ignition key on a Saturn?
If the battery is known to be fully charged, the Saturn should start. If there is an error in the ignition switch, you will not hear the typical faint “click” when you initially turn the ignition key to the “III” position to crank the engine.
How do you reset passkey on Saturn Ion?
Resetting the PASSKEY can be necessary at times if the programming in the module becomes corrupted or if a new key and key cylinder are installed. To reset the system, get in the car and shut the door. Turn the key on to the “Run” position without cranking the engine. Leave the key there for exactly 10 minutes.
How does the security system work on a Saturn Ion?
The Ion uses a passive alarm system that arm when you exit the vehicle and lock the doors with the keyless remote. If at any time the doors are opened without the use of the remote or the keys the alarm will sound. This is to prevent the theft of contents within the car.
What should I do if my Saturn ignition is not working?
Turn the ignition key and try to start the engine. If the battery is known to be fully charged, the Saturn should start. If there is an error in the ignition switch, you will not hear the typical faint “click” when you initially turn the ignition key to the “III” position to crank the engine.
How does the ignition switch work on a Saturn?
Saturn vehicles use a transponder inside the ignition key to prevent unauthorized engine starting. There is a component inside the dash and linked to the ignition switch that sends a signal to the starter motor allowing the vehicle to start.
When did the Saturn Ion first come out?
The Saturn ION was a compact car sold by Saturn between the 2003 and 2007 model years.
When did Saturn Ion get new steering wheel?
The 2005 Ion sedan models also received a new steering wheel, the same one used in the 2004 Ion coupe models. In the middle of the 2005 model year, the seats in the base Ion1 model received upgraded fabrics and a height adjustment feature.
When did the Saturn Ion fuse box come out?
The compact car Saturn Ion was produced from 2002 to 2007. In this article, you will find fuse box diagrams of Saturn Ion 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.