How do you set preset radio stations?
Press the TUNE + button to select the desired station. Press and hold down the ENTER button. While holding down the ENTER button, press the MEMORY PRESET + button to select the desired preset number. Hold down the MEMORY PRESET + button until the radio beeps and PRESET stops flashing in the display.
What is RDS clock synchronization?
RDS is used to identify stations and radio programs, and automatically synchronizes the clocks on some car radios, clock radios, and communication receivers that already receive FM broadcasts. RDS is also used for auto clock synchronization on some clock radios and communication receivers.
Is there a way to preset a radio station?
Simply tune into the station that you want to preset, press and hold the preset button to memorize the frequency. With preset radio stations that can be stored, you can quickly access your favorite radio station without having to manually tune the frequencies each time.
Is the clock radio stored in flash memory?
It is strange that the radio buttons work ok and the clock memory doesn’t. Not really strange at all. Most station presets are stored in FLASH memory and won’t be lost even if you disconnect the battery for a year. The clock, however, has to have battery power all the time. Have your new battery load tested.
Why does the clock reset when the engine is started?
I’ve had this same problem with battery voltage dropping too low when the engine is started and having the clock reset. The cure is a new battery. The ignition switch might be breaking contact to the radio when the ignition key is turned to the START position.
How does the Philips clock radio Wake you Up?
The Philips audio system comes with two alarm times. Set one alarm time to wake you up and the other time to wake up your partner. To counter oversleeping, the Philips Clock radio has a snooze feature. Should the alarm ring and you wish to continue sleeping a bit longer, simply press the Repeat Alarm button once and go back to sleep.
Is the clock accurate on all radio stations?
Not all radio stations transmit RDS data. Accuracy of RDS data varies by station, and the clock time is not guaranteed to be accurate. If the clock doesn’t display the current time accurately, or if you don’t want to receive current time through RDS, set Clock Time or CT to OFF, and set the time manually.
How long does it take for a radio controlled clock to set?
When you turn a radio controlled clock on, it will probably miss the first time code, so it usually takes more than one minute to set itself (sometimes 5 minutes or longer) depending on the signal quality and the receiver design.
How does a Staiger radio controlled clock work?
Simply insert the battery, press your time zone and then press the flap just above the left side of the battery. Hold until you reach the correct time and then release. Your clock is now an accurate quartz clock until it will find the signal. Your Atomic clock will still continue to look for the signal and start adjusting itself automatically.
How to set and store radio presets with HondaLink?
Use the bottom selector to search for the station you would like to add as a preset. Once you have found your station, press the “Presets” option while your desired station is playing through the radio. Next, determine which preset you would like to remove in exchange for your new station.