How do you reset the radio in a 2013 Jeep Compass?
To reset the radio in your 2013 jeep grand cherokee vehicle, turn the ignition key to the “on” position and turn your radio on, wait ten seconds and then turn your radio off. Depress radio power button again and wait for reset.
How do you reset the radio on a 2012 Jeep Compass?
To reset the 2012 Jeep Grand Cherokee radio, hold down the two dial buttons for ten seconds. You will come into problems with the sound. This could be from the stereo’s speakers or a phone that is connected to the vehicle.
How do you reset the radio on a 2013 Jeep Wrangler?
Registered. If it’s the original Jeep radio, the only way to reset is to disconnect from power for 5+ minutes, then hook it back up. You can emulate this by disconnecting the battery for the same amount of time, then reconnecting it.
What to do if your CB radio has no power?
CB Radio Has No Power. No lights come on the radio. There is also no sound. You cannot transmit or receive. Check Power Cord Connections. Make sure the power cord connections are attached correctly. If your radio has a power plug, make sure it is seated well. Check Fuse. Make sure the CB radio’s fuse is not blown and that it is seated correctly.
Why is there no sound on my Radio?
Dont have the option code because im at work right now. I can turn it on and off and change stations but there is no sound and no response from the steering wheel volume control or the radio knob. Anyone know the cure for this?
What to do if your radio has no volume?
First time nothing was still no volume on radio and cutting out every few seconds on BT CD and SAT. Determined to kill or cure I did it again preheated to 400 for 10 mins then left to cool. Works perfectly.
Why does my Jeep Wrangler have no sound?
Still no sound. No sound from the CD player, either. I checked fuse #3 (sub woofer system) & fuse #14 (radio). Both looked good. Are there any radio fuses under the hood? Yesterday, my speakers worked fine. No problem. This morning, my radio lit up, but no sound. At first, I thought that the radio station had a problem. So, I switched stations.
Dont have the option code because im at work right now. I can turn it on and off and change stations but there is no sound and no response from the steering wheel volume control or the radio knob. Anyone know the cure for this?
First time nothing was still no volume on radio and cutting out every few seconds on BT CD and SAT. Determined to kill or cure I did it again preheated to 400 for 10 mins then left to cool. Works perfectly.
Why is my Sirius Radio not working in my Jeep?
Tried having Sirius re-send the activation signal, no dice. Tried having the dealer re-set the stereo, no dice. Dealer ended up replacing the whole thing under warranty. Its been 2 weeks since I went to the dealer. They said it would take 7-10 working days for my radio to come in.
Still no sound. No sound from the CD player, either. I checked fuse #3 (sub woofer system) & fuse #14 (radio). Both looked good. Are there any radio fuses under the hood? Yesterday, my speakers worked fine. No problem. This morning, my radio lit up, but no sound. At first, I thought that the radio station had a problem. So, I switched stations.