How do you reset the airbag light after replacing the clock spring?
Yes, you need to reset the light with airbag scanner, but disconnecting the battery, jump the + and – cable together for few minute should do the trick as well.
Do you have to program a clock spring?
Does a new clock spring need to be programmed? No, the clock spring itself will work without programming. If your clock spring has an integrated steering angle sensor, you may need to carry out a steering angle reset, reset the stability control, and ABS lights.
Why does the airbag light come on on a Toyota Camry?
Toyota Camry Airbag Light on Causes Your airbag light is part of your Camry’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.
How is the steering rack on a Toyota Camry?
This article applies to the 5th generation Toyota Camry (2002-2006). The steering rack consist of a gear (pinion gear) and a toothed racked. The rack is fixed in position by mounts and bushings. As the pinion gear rotates side to side on the rack, the tie rods push and pull against the steering knuckles.
How do you replace the air box on a Toyota Camry?
Loosen all the clamps holding the intake piping to the air box and throttle body with a Phillips head screwdriver. Additional hoses connected to the intake pipe may instead be disconnected by squeezing the clamps. Channel lock pliers work well for this type of clamp. Now remove the bolt on the driver’s side of the air box.
Where is the return line on a Toyota Camry?
Figure 6. The return line will be in the area of the red circle. Measure and record the thread length on the tie rod end below the toe adjustment nut. Straighten out the cotter pin and pull it away from the tie rod end.