How do you replace an evaporator temperature sensor?
Once you’ve removed the old sensor, the replacement steps are in direct opposite order. The first step in the installation process will be to reattach the electrical harness to the new sensor. Step 10: Reinstall the EVAP temperature sensor. Screw the new sensor into the AC condenser, turning it to the right.
Can a temperature sensor be replaced on a Ford Focus?
However, the job itself of replacing the sensor is incredibly simple (once the dashboard has been removed).Common vehicles that experience failure of this component frequently include the Ford Focus from 2003 to 2008; however, it can fail on any vehicle over a period of time.
What does the code p-0535 mean on an evaporator sensor?
The OBD-II code (P-0535) indicates that an Evaporator Temperature Sensor failure has occurred. Beyond completing an OBD-II scan, a bad or failing evaporator temperature switch will produce a few symptoms that can alert the driver of a potential issue that should be serviced.
What does it mean when your AC sensor is inconsistent?
AC temperature is inconsistent: On the lines of the warning sign above, inconsistent temperature is often an indicator that the sensor is starting to fail. In this case, the sensor will occasionally send correct data, causing the AC system to work fine.
Once you’ve removed the old sensor, the replacement steps are in direct opposite order. The first step in the installation process will be to reattach the electrical harness to the new sensor. Step 10: Reinstall the EVAP temperature sensor. Screw the new sensor into the AC condenser, turning it to the right.
How to change the oil temp on a Hyundai?
Replace the oil temperature sensor with a new part. Torque the new sensor to a value of 7.2 – 8.7 ft.-lbs. Apply Permatex Ultra Gray Sealer or Hyundai Ultra Gray Gasket Sealer P/N 00231-13800 to the valve body cover and reinstall the cover. Torque the bolts to 7.2 – 8.7 ft.-lbs.
Can a Hyundai transaxle be replaced for oil temperature code?
NOTE: According to Hyundai, do not replace the transaxle for oil temperature sensor codes. Instead, follow the repair procedure listed here. Attach a GDS, select vehicle and A/T menu and check for DTCs. Record the DTCs and description, and delete the DTCs.
What kind of Sealer to put on Hyundai Trans temp?
Apply Permatex Ultra Gray Sealer or Hyundai Ultra Gray Gasket Sealer P/N 00231-13800 to the valve body cover and reinstall the cover. Torque the bolts to 7.2 – 8.7 ft.-lbs. Add approximately five quarts of Hyundai SPH-IV ATF (P/N 00232-19045).
How is the temperature of an evaporator controlled?
The operation of this luxury feature is controlled by a very small sensor called the evaporator temperature sensor or EVAP temperature switch.
The operation of this luxury feature is controlled by a very small sensor called the evaporator temperature sensor or EVAP temperature switch.
The OBD-II code (P-0535) indicates that an Evaporator Temperature Sensor failure has occurred. Beyond completing an OBD-II scan, a bad or failing evaporator temperature switch will produce a few symptoms that can alert the driver of a potential issue that should be serviced.
When to replace temperature sensor on Chevy Colorado?
The replacement of the sensor, or the much easier resistor mod, was to LOWER the evaporator minimum temperature 2004 and 2005 Colorados. In your problem, you need to raise it a bit.
Where is the temperature sensor located on a car?
It’s commonly located on the passenger side on most cars, trucks, and SUV’s. Most of the time, the sensor is located towards the rear of the condenser (or closer to the rear of the vehicle as opposed to the front end). Step 6: Remove the EVAP temperature sensor.
How does an evaporator temperature sensor need to be replaced?
The evaporator temperature sensor is verified and needs to be replaced The defective evaporator temperature sensor is removed from dash evaporator case The new evaporator temperature sensor is installed and dash reinstalled The vehicle is road tested for proper operation and a/c operation checked
However, the job itself of replacing the sensor is incredibly simple (once the dashboard has been removed).Common vehicles that experience failure of this component frequently include the Ford Focus from 2003 to 2008; however, it can fail on any vehicle over a period of time.