How do you remove an audio gateway control unit?
You will need a deep 10 mm socket to remove the nut. Using a cordless drill and metal drill bit, drill out the two rivets. Pull out the AGW N93/1 unit. Be careful not to bend the fiber-optic cables too much or kink the cable. Remove the three nuts that hold the audio gateway control unit tied to the metal bracket.
Can a factory stereo be installed on a Mercedes Benz E class?
A factory stereo is boring when compared to all the options of aftermarket stereos. You can even upgrade to one with touch screen navigation and many other features. Keep in mind that most aftermarket stereos won’t be compatible with the Mercedes-Benz E-Class because it uses a fiber optic audio system.
How do you remove radiator from Mercedes AMG?
Remove the bolts on the tray in order to remove it. Locate the radiator stop plug underneath your vehicle. Place the radiator drain pan underneath the car, and loosen the radiator stop plug. In order to speed up the drainage process, remove the cap of the coolant reservoir on top of your engine to allow air flow. Figure 6. Drain the coolant.
A factory stereo is boring when compared to all the options of aftermarket stereos. You can even upgrade to one with touch screen navigation and many other features. Keep in mind that most aftermarket stereos won’t be compatible with the Mercedes-Benz E-Class because it uses a fiber optic audio system.
How to remove a car radio without special tools?
There are many radios which you can remove by just a metal wire, but if you have mine type, you can just use two thin steel knifes, and if with them it is not enough you will have to use pliers as well. In video you can see Sony Xplod cdx R3350 radio, it is my Honda Accord cc7 1993 V
Is it hard to remove a radio wire?
Well it is not that hard if you have right tools. There are many radios which you can remove by just a metal wire, but if you have mine type, you can just use two thin steel knifes, and if with them it is not enough you will have to use pliers as well.