How do you put the back seats down in a Hilux 2017?

How do you put the back seats down in a Hilux 2017?

To fold down one or both of the rear seatbacks, pull up on the release knob and fold the seat forward. To return the seatback to its original position, lift it up and push it back into place until you hear the latch click.

Do the back seats fold down in a Nissan Qashqai?

The rear seatbacks fold down in a traditional 60/40 split rather than the more versatile 40/20/40 arrangement offered in some rivals, and they don’t do anything else clever, such as sliding back and forth or reclining.

Does the back seat fold down in a Hilux?

The rear seats are reasonable for the class, but certainly not the most spacious. The seat base can either fold up in one piece or in a 60:40 fashion, depending on the variant.

How to remove the rear seat on a Nissan Sentra?

Tighten the rear seatback assembly bolts to specification. Refer to SE-22, “Exploded View”. Place the rear seatback assembly (LH) in the folded down position. Release the J-hook retainer (A) and unzip the seatback trim zippers (B). Remove two nuts (A) and the armrest assembly. Installation is in the reverse order of removal.

How to remove the bolster from a Nissan Sentra?

Removal and Installation – Rear Seat Bolster REMOVAL Remove the seat cushion assembly. Refer to SE-23, “Removal and Installation – Seat Cushion Assembly”. Remove the seat belt from the seat belt guide. Remove the bolt at bottom of rear seat bolster. Lift the rear seat bolster to remove. INSTALLATION

What do you need to know about the Nissan Sentra?

Seatback striker Seatback latch release knob Seatback latch assembly Seatback silencer (RH) Rear seatback frame (RH) Seatback latch release knob finisher Rear seat bolster trim (RH) Rear seat bolster pad (RH) Rear seat bolster (RH) Seatback trim (RH) Seatback pad (RH) Seatback hinge bracket (RH) LATCH bracket (RH) Seat cushion assembly

When to use automatic locking retractor in Nissan Sentra?

WARNINGThe three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to …

Tighten the rear seatback assembly bolts to specification. Refer to SE-22, “Exploded View”. Place the rear seatback assembly (LH) in the folded down position. Release the J-hook retainer (A) and unzip the seatback trim zippers (B). Remove two nuts (A) and the armrest assembly. Installation is in the reverse order of removal.

Removal and Installation – Rear Seat Bolster REMOVAL Remove the seat cushion assembly. Refer to SE-23, “Removal and Installation – Seat Cushion Assembly”. Remove the seat belt from the seat belt guide. Remove the bolt at bottom of rear seat bolster. Lift the rear seat bolster to remove. INSTALLATION

How do you remove the bottom seat on a Nissan Versa?

This is a 2014 Model, Grab the rear of the bottom seat, where the bottom portion connects with the top seat, and lift it up gently and place a screwdriver under the metal clip, (between metal clip above, and body frame below), and simply pry up, and the seat clip will release from its retainer.

Seatback striker Seatback latch release knob Seatback latch assembly Seatback silencer (RH) Rear seatback frame (RH) Seatback latch release knob finisher Rear seat bolster trim (RH) Rear seat bolster pad (RH) Rear seat bolster (RH) Seatback trim (RH) Seatback pad (RH) Seatback hinge bracket (RH) LATCH bracket (RH) Seat cushion assembly