How do you get to the boot menu on a Dell desktop?

How do you get to the boot menu on a Dell desktop?

During the Power-on Self Test (POST), when the Dell logo appears, you can:

  1. Access System Setup by pressing F2 key.
  2. Bring up the one-time boot menu by pressing F12 key.

How do I boot to Dell setup?

Power on the computer. Tap the F2 key to enter System Setup when the Dell logo appears. If you have trouble entering Setup using this method, press F2 when the keyboard LEDs first flash. Try not to hold down the F2 key as this can sometimes be interpreted as a stuck key by the computer.

How do I select boot option on Dell laptop?

Steps are provided below:

  1. Tap F2 key at the Dell logo screen to enter System Setup or BIOS.
  2. On the left pane, click Boot Sequence.
  3. Boot mode should be selected as UEFI (not legacy) within the BIOS go to the General > Boot Sequence then click Apply.
  4. Check that Secure Boot is set to Disabled.

How do I get Dell boot menu on Windows 10?

Step 1: For this method, you need Windows 10 boot media or Windows 10 bootable installation media. Then, you need to insert the media into a USB port or DVD drive. Step 2: Shut down your PC. Turn on the computer and quickly press the F12 key on the screen where the Dell logo appears until you see Preparing one time boot menu.

What to do if your Dell Computer does not boot?

If your Dell computer does not power on or boot into the operating system, it is recommended that you first perform a hard reset. Performing a hard reset usually fixes many problems and also drains any residual power that may be causing the problem. Perform a hard reset Turn off the computer.

How to access the UEFI BIOS on a Dell?

If the system has a pre-UEFI BIOS, or to boot to the UEFI BIOS without entering Windows. Tap the key at the Dell logo when the system is starting up.

How to enter system setup on Dell laptop?

Tap the F2 key to enter System Setup when the Dell logo appears. If you have trouble entering Setup using this method, press F2 when the keyboard LEDs first flash. Try not to hold down the F2 key, as this can sometimes be interpreted as a stuck key by the system.