How do you fix dents before painting?
Start by removing the paint inside and around the dent with 24-grit paper. Switch to 80-grit sandpaper and hand-sand the entire dent. Use the same sandpaper to rough up and feather the paint around the edges of the dent. Clean the entire area with wax remover and a clean rag.
Can a dented motorcycle gas tank be repaired?
Having a dented motorcycle gas tank repaired professionally is expensive, not to mention that you’ll be without your bike while it’s in the shop being fixed. Before you call the repair shop, try to get the dent out yourself using this auto dent repair trick that pops out dents without doing any damage to the paint job.
Why are there dents in my gas tank?
But it can be an eye sore if there are any dents in the tank, even if they’re just small ones. As annoying as they are, motorcycles are especially susceptible dents in the tank because of where they’re normally stored: the corner of the garage.
Do you need to paint a small dent in your car?
Consider a small repair that was not sanded to bare metal. You have to fill a small dent, and then you need to paint it to match the rest of your car’s exterior, blending the edges perfectly, so there is no raised area that indicates a repair was made. The smaller the repair area, the tougher it can be.
What should I do before painting my gas tank?
Put on your safety glasses and project respirator. Put down newspaper below the tank and put old sheets over anything in your work space you don’t want to get paint on. Before you paint, make sure your tank is primed in all one color.
What kind of paint to use on a motorcycle gas tank?
I have restored over a dozen motorcycles and have tried most methods to paint a tank. So what is the best paint to use on a motorcycle gas tank? The best paint to use on a motorcycle gas tank is Dupli-Color aerosol spray paint.
How to remove dents from motorcycle gas tank Dent fix?
If this parody, we try a few methods I use to remove dents from motorcycle gas tanks . . These dent fix easy how to’s remove dings and pull bad dents when using the right tools and processes. Handy for when an otherwise nice tank for café racer needs to be fixed.
How long does it take to paint a gas tank?
Let this first layer dry for about 30 minutes (please be sure to follow the instructions on the can) and then repeat this process for every layer. After your last layer: let it dry for a 1 or 2 days (the longer, the better). When your primer coats have dried for at least 1 day, it’s time to bring some color on your gas tank!
How many coats of primer do you need to paint a gas tank?
As mentioned before, the biggest part of the paint job is the preparation, but now you can actually start spraying (but still needs a little sanding…!). After the hours of sanding and smoothening it’s time for your first layers of primer coats! You need a minimum of 3 layers, but 4 or 5 is better. Every layer should be applied like this:
How to re-paint a motorcycle gas tank?
Get the sandpaper, get the sanding block, and get a bucket of water. To start, I’d go with the 80-200 grit. Put some water on the tank and start sanding. NOTE: This takes awhile. My first time, I spent at least 10 hours sanding the tank.