How do you fix a hyper flashing LED?
A quick way to alleviate the error message, as well as the hyper flashing, is to change the resistance and draw of the turn signal. You can accomplish this by using aftermarket car computer software. This will fix the error message and your hyper flashing at the same time.
Why do led turn indicators flash so fast?
A standard 21W turn signal bulb will draw approx. 1.75 amps of current at 12V. A LED turn signal will draw a lot less , usually less than .5 amps. This causes the BCM to think that a light is out and causes the hyper-flashing. . I dont think thats the reason. If the light draws very less current why will the BCM flash it faster?
Why does my BCM flash when I Turn on the led?
LED’s draw much less current than filament bulbs. A standard 21W turn signal bulb will draw approx. 1.75 amps of current at 12V. A LED turn signal will draw a lot less , usually less than .5 amps. This causes the BCM to think that a light is out and causes the hyper-flashing.
When do you change your turn signal to led?
Hyper-flashing, also known as rapid flash or hyper flash, it’s the most common phenomenon that occurs when you change your turn signals to LED lights.
Why do turn signals stop working after SMD bulbs are installed?
The reason that the turn signals suddenly stop working after LED or SMD bulbs are installed has to do with the load put on the signal flasher relay. In many vehicles, the signal flasher is a thermal flasher design. This type of signal flasher relay work by heating up with the current for the bulbs passes through the relay.
Why are my turn signals flashing too fast?
Using less power is a good thing for energy consumption and efficiency, but not when your car thinks the bulb is burned out and goes into a rapid flash mode. Fortunately, there is a relatively easy fix for when your LED turn signals flash too fast. Take a look…
Hyper-flashing, also known as rapid flash or hyper flash, it’s the most common phenomenon that occurs when you change your turn signals to LED lights.
Do you need a flasher for an LED turn signal?
Yes, even if you go with LED bulbs in your turn signals you will still either need a replacement flasher relay or load resistors across each LED turn signal bulb.
How to get rid of hyper flash for LED turn signal?
To alleviate this, some vehi- cles have the ability to change the resistance and draw requirements of the turn signal circuit to use an LED turn signal using aftermarket car computer software. This not only gets rid of the error message, but it also fixes the hyper-flashing issue at the same time.