How do you change a gas tank on a Harley Davidson?
Reach into the tank and push down on the fuel pump to remove it from the fuel pump housing so it will fit through the hole. Remove the complete fuel pump assembly including the fuel pump, fuel pump housing, fuel filter screen, hose, fuel level sender and float from the old fuel tank. 15.
How do you replace a fuel valve on a Harley?
Begin by draining as much fuel from the tank as possible. It is not necessary to remove the fuel tank to replace your Harley fuel valve. In fact, some tasks are easier with the tank on the motorcycle. When you can not drain anymore gas through the valve, jack the rear end of the motorcycle.
Can a fuel gauge be removed from a Harley Davidson?
If you have a lot of resistance or feel like you have to pull hard on the harness, stop and reevaluate. Something is wrong. The wires should pull through with little effort during Harley Davidson fuel gauge removal. If you are replacing your stock gauge with an aftermarket gauge, you should use the same factory plugs and pin connectors.
Do you have to remove the fuel tank on a Harley Davidson Dyna Glide?
The fuel tank on a Harley Davidson Dyna model has to be removed to install various modifications, and to diagnose as well as fix various issues, both mechanical or electrical. Removing the fuel tank can be a bit unnerving considering it is one of the most cosmetically important parts of the bike, and most easily scratched or dented.
Begin by draining as much fuel from the tank as possible. It is not necessary to remove the fuel tank to replace your Harley fuel valve. In fact, some tasks are easier with the tank on the motorcycle. When you can not drain anymore gas through the valve, jack the rear end of the motorcycle.
How do you install a fuel tank on a Harley Davidson?
Re-installing the fuel tank can be accomplished by using the reverse procedure of tank removal. Set the tank back onto the frame and install the mounting bolts, washers, and acorn nuts. Torque the nuts to 15 to 20 ft/lbs.
Where is the fuel line on a Dyna Glide?
Have a shop rag handy to catch any remaining fuel that leaks out. Disconnect the fuel supply line by lifting up on the quick-connect sleeve and pulling down on the fuel line. Disconnect the fuel gauge wiring harness on the left underside of the tank. Figure 4. Fuel line quick-connect fitting. Figure 5. Fuel gauge wiring harness.