Menu

Navigation

How do I fix my Acer It says no bootable device?

Posted on by Arif Clayton

How do I fix my Acer It says no bootable device?

Use the following steps to resolve this situation:

  1. Hold the power-button for 5 seconds to power off the device.
  2. Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS.
  3. Press F9 and then ENTER to load the default configuration.

What do I do if my laptop says no bootable device?

Here are several fixes you should try:

  1. 1) Check your boot order.
  2. 2) Fix the boot information of your system.
  3. 3) Set the primary partition back as active.
  4. 4) Reset your system.
  5. Enter the BIOS.
  6. Press the right arrow keys on your keyboard until the Boot tab is opened.

How do I fix Uefi no bootable device?

Solution

  1. From a power off state, power on the system and Press F2 at the Dell logo to boot into the BIOS setup menu.
  2. Choose Boot sequence and change the option from Legacy to UEFI then click Apply in the lower right corner of the screen (Figure 2):

What is a bootable device?

A boot device is any piece of hardware containing the files required for a computer to start. For example, a hard drive, floppy disk drive, CD-ROM drive, DVD drive, and USB jump drive are all considered bootable devices. The most commonly used boot device or boot drive is the hard drive.

How do I boot my Acer?

  1. Press F12 to access the Acer boot menu.
  2. Go to the Main menu tab by pressing the right arrow button.
  3. Press the down arrow to select F12 Boot Menu.
  4. Press Enter to change the status from Disabled to Enabled.

How can I make my device bootable?

Bootable USB with Rufus

  1. Open the program with a double-click.
  2. Select your USB drive in “Device”
  3. Select “Create a bootable disk using” and the option “ISO Image”
  4. Right-click on the CD-ROM symbol and select the ISO file.
  5. Under “New volume label”, you can enter whatever name you like for your USB drive.

Why is there no bootable device found?

The “boot device not found” error is generated by the system’s motherboard. If the BIOS cannot locate the bootable hard drives, there is no chance of locating the MBR or boot sector. The computer will search for any known boot device configuration, and if all devices error, you get the message.

How do I get a boot device?

From within Windows, press and hold the Shift key and click the “Restart” option in the Start menu or on the sign-in screen. Your PC will restart into the boot options menu. Select the “Use a device” option on this screen and you can choose a device you want to boot from, such as a USB drive, DVD, or network boot.

How do you fix boot failure?

How to Fix Boot Device Missing or Boot Failed Error?

  1. Check Boot Order Sequence. Restart your PC.
  2. Repair Windows Boot Sector.
  3. Inspect Hard Drive.
  4. Restore and Backup Files.
  5. Format or Replace Disk.
  6. Professional Hard Drive Data Recovery Service by Stellar® Data Recovery.

What to do if your ACER laptop says no bootable device?

Press F9 and then ENTER to load the default configuration. Press F10 to save your changes, and restart the system. Select Yes and press ENTER to confirm. Your system should boot up normally, If you are still experiencing a problem, please contact Acer support for further assistance.

How to boot to Recovery Console on Acer Aspire S7?

Unplug the USB key and plug it into your Aspire S7. During bootup, you will now be given the option to boot to a Recovery Console. Select “Command Prompt” to get you to the a black console window. Navigate to the file you copied to the USB key from Step 6.

How to reinstall Windows on Acer Aspire s7-191?

Use the following steps to reinstall Windows on your Aspire S7-191: Change the BIOS mode from UEFI to Legacy. After exiting the BIOS, enter the Intel Rapid Storage Utility by pressing Ctrl + I. In the utility, delete any existing RAID. Select option 2, then press the Del key, and then Y key for yes.

Why does my computer say no bootable device?

After an unexpected shutdown on a system with Solid State Drive (SSD), you may see a message No bootable device — Please restart system. This problem occurs when the table of content of the SSD is corrupted due to the unexpected shutdown. It can be corrected automatically by the SSD using the backup of its table of contents.