How do I calculate cubic feet of dirt?
How to Calculate Cubic Feet for Soil
- Use a measuring tape to determine the length of the location where you will be placing the soil.
- Measure the width in feet.
- Determine the necessary depth of the soil in feet.
- Multiply the width by the length by the depth to find the number of cubic feet of soil you need.
How do I calculate how much dirt I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How much soil do I need for a 4×8 raised bed?
How much soil? For a 4×8–foot raised bed with a 10” height, about 1 cubic yard of soil is needed. For a 4×8-foot raised bed with a 6” height, using Mel’s Mix: about 5 cubic feet each of compost, peat moss, and vermiculite is needed.
How many square feet are in a cubic yard of dirt?
100 square feet
How Much Does A Yard Cover? A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth.
How do I figure out how many cubic feet I need?
The following conversion factors are used to convert the respective units to cubic feet.
- length (feet) × width (feet) × height (feet) = cubic feet.
- length (inches) × width (inches) × height (inches) ÷ 1728 = cubic feet.
- length (yards) × width (yards) × height (yards) × 27 = cubic feet.
How many square feet is in a load of dirt?
One Cubic Yard = 27 Cubic Feet Length x Width = Square Feet
| 1 YD | 3 YD | |
|---|---|---|
| Depth | ||
| 1 Inch | 324 sq.ft. | 972 sq.ft. |
| 2 Inches | 162 sq.ft. | 486 sq.ft. |
| 3 Inches | 108 sq.ft. | 324 sq.ft. |
How much does 1 cubic yard of dirt weigh?
about 2,200 pounds per cubic
Soil: Weighs about 2,200 pounds per cubic yard, depending on the moisture content. Sand, Gravel, Stone: Can tip the scales at upwards of 3,000 pounds per cubic yard.
How do you calculate the amount of soil needed for a raised bed?
V = L x W x H
- Measure the length, width and height of your bed. (Unless the boards are very thick, don’t worry about inside/outside measurements.)
- Multiply all the measurements together: 6 x 3 x 1.4 = 25.2 cubic feet.
- Divide the answer by 27 to get the number of cubic yards.
How much dirt is in a dump truck?
Dump trucks can usually carry about 10 to 14 cubic yards of dirt. To understand what a cubic yard looks like, it’s easiest to think of one as a block of material around 3 feet in length, height, and width.