How do I backup my brocade config?

How do I backup my brocade config?

Backing up a Brocade switch

1. Establish a putty session to the switch and login as normal.
2. Enter the command configupload.
3. At the protocol selection prompt choose the protocol appropriate for you FTP server.
4. At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.

How do I take backup of Brocade switch configuration file in local server?

Answer

1. switch:admin> configupload.
2. Protocol (scp, ftp, sftp, local) [ftp]:local.
3. File Name [config.txt]: config.txt.
4. switch:admin> configlist -local.

How do I restore config file in Brocade switch?

In the CommandCentral Storage Console, display the Switches Summary (Managing > SAN > Switches.) In the table, click the name of the Brocade switch whose configuration you want to restore. In the drop-down list in the switch’s Overview pane, click Restore Switch Configuration and click Go.

How do I download Brocade switch settings?

Steps

1. Go to the software download page.
2. In the list of products, find the row for Fibre Channel Switch, and in the drop-down list select Brocade.
3. On the Fibre Channel Switch for Brocade page, click View & Download.
4. On the Fibre Channel Switch – Brocade page, click the MetroCluster link.

How do you backup a switch?

Connect to the device either via console cable, Telnet or SSH. 3. Log in > Go to enable mode > issue a “copy tftp running-config”* command > Supply the IP address of the TFTP server > Give the backup file a name. Note: You can also use startup-config to restore the config saved in NVRAM rather than the running-config.

How do I get brocade Supportsave?

Answer

1. Log on to the switch as admin using telnet or ssh.
2. At the command prompt type: supportsave.
3. You are prompted as: a) the IP address of your FTP server.
4. The files generated by this command are compressed before being sent off the switch. You can then compress these files together before sending to IBM Support.

How do I copy a running config from the console?

Log in > Go to enable mode > issue a “copy running-config tftp”* command > Supply the IP address of the TFTP server > Give the backup file a name. Note: You can also use startup-config to copy the config saved in NVRAM rather than the running-config.

How do you get the SupportSave from BNA?

Collect BNA Server SupportSave via GUI Go to the menu Monitor -> Technical Support -> SupportSave (this is for the BNA Software, for switch SupportSave you need to select Product / Host SupportSave). Click OK and BNA will start collecting the BNA Server SupportSave.

How do I run SupportSave?

Run the supportsave command to create a folder and dump the files in using the CLI command supportsave -U -d . List out the USB contents using the CLI command usbstorage l to confirm all the files are there, it will be under the root folder called support .

How to take backup of brocade switch configuration file in local server?

How to take backup of Brocade Switch configuration file in local server? To take backup of configuration file first login into Switch by using admin account Give configupload command It will ask you host details in which server you want to save configuration file.

What’s the wizard for the brocade 300 switch?

Brocade 300 setup and configuration is simplified with the Brocade EZSwitchSetup wizard, which makes switch configuration, deployment, and management an easy 3-step point-and-click process.

What makes a brocade network switch so successful?

One thing that has led to Brocade’s success is their robust CLI, which allow you to view and modify almost every aspect of their switch. This includes zoning configurations, SNMP attributes, domain ids, switch names and network addresses, etc.