How big is a CTA tools belt tensioner socket?
CTA Tools 2717 Toyota Belt Tensioner Socket is designed with a special configuration with 6 internal slots that service 2000 and up Toyotas. Use with 1/2-Inch square or 7/8-Inch hex drive tools.
Is the tensioner pulley on a 2003 Toyota Corolla Le?
Great addition to my toolbox, but this does not fit the tensioner pulley bolt on a 2003 Corolla LE. The bolt on my car required a slim line Torx bit (T50) in order to get into the tight space. I guess Toyota used different bolts on this pulley throughout the production years. Good tool, but couldn’t use. Too thick.
How do you remove a belt from an auto tensioner?
Hold the tension from the belt, and slip the belt off the auto tensioner pulley to remove the belt and pulley system. Slowly release the tension to avoid damage or injury, and then remove the tool from the belt auto tensioner.
What’s the hole in an auto tensioner pulley?
That hole is for a 3/8-inch ratchet nub, the part that holds the socket. Place the nub of the ratchet wrench into the square hole of the tensioner pulley and rotate the wrench. Try both directions, which will require you to flip the selector on the wrench to the opposite direction (so you can loosen or tighten).
https://www.youtube.com/watch?v=gfSJvN-CE2E
What kind of wrench do I need to remove locknut on Toyota Tacoma?
This wrench is used to remove the 4-hole locknut on the inside face of the hub. For use on 1995 and newer Tacomas, and 1996 and newer T100s and 4Runners with 4-hole locknuts. Rolled pins are easily replaceable if damaged, extending the life of the tool. Similar to Toyota No. 09318-12010-01.
Is there a Toyota locknut socket wrench on OTC?
Similar to Toyota No. 09318-12010-01. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available.
What kind of wrench do I need for Toyota hub?
OTC’s No. 7941 Hub Locknut Socket Wrench for select Toyota vehicles features rugged construction and a 1/2 inch square drive. This wrench is used to remove the 4-hole locknut on the inside face of the hub.