Can you put floating shelves on plasterboard?
We have provided the ultimate hardware solution for fitting floating shelves into plasterboard walls. These are used in conjunction with the innovative Gripit brown plasterboard fixings. The back of the shelves come pre-drilled with a relief making the fixing slot perfectly in place.
Can drywall support a shelf?
Drywall — especially the commonly used 1/2-inch-thick size — supports heavy weights when the shelving is properly installed. You can install heavy shelves with confidence that they will remain stable and secure, by using brackets. Measure the length of the shelf you are installing.
What wall plugs do I need for plasterboard?
Rawl plugs for plasterboard are designed to expand or pull back from the other side of the hollow substrate when the screw is inserted to help distribute your hanging load. As they are supplied with anti rotation capabilities this helps to support the grip of the fixing.
What type of wood is used for alcove shelving?
Ordinary planed timber (50x18mm (2x¾ inch) can be used for the battens and will be strong enough for most shelves – where a stronger shelf is needed, a wooden batten can be fitted along the back of the alcove and/or attached to the underneath of the front edge of the shelf – if using chipboard or mdf for the shelves, a …
How much weight can drywall support?
Thin drywall will hold 1.2 to 1.6 pounds per square foot without some type of support. Thicker drywall will hold 1.5-2.1 pounds per square foot without additional support. Shear and tension affect the weight supported.
Can a shelf be fitted into an alcove?
One great advantage of fitting shelves into an alcove is that battens can usually be fitted to the side walls to support both ends of each shelf leaving each shelf unobstructed by wall brackets etc.
How are alcoves used in a Victorian house?
Traditional alcove cabinets with modern floating shelves in Victorian house with fireplace in between. The main feature of these alcoves is that the shelving units above the cabinets are not in line with the chimney breast and sticking out by a few inches.
Is it OK to have alcoves above kitchen cabinets?
The main feature of these alcoves is that the shelving units above the cabinets are not in line with the chimney breast and sticking out by a few inches. This is a very good idea for the shallow alcoves in order to maximize the shelving space. It also doesn’t look bad at all especially the cornice around the corner of the top of the shelving unit.
What kind of glue do you use to build shelves?
As well as using adhesive to help the screws stick the battens to the wall, I used some PVA wood glue at the joints too. Then just repeat this for your other shelves, not forgetting to adjust the batten size if you’ve decided your bottom shelf is going to be deeper.