Can you put a sprocket on backwards?
Yes, it is on backwards.
How do you remove a sprocket nut from a transmission?
Transmission sprocket nut has left-hand threads; turn nut clockwise to remove from main drive gear. 2. Remove original spacer sleeve from main drive gear and remove original oil seal from transmission housing (right crankcase half on XL models), according to procedures in the appropriate Service Manual. 3. See Figure 1.
What kind of sprocket do you use for a drive shaft?
This bushing, when inserted into the sprocket, compresses onto the shaft providing a tight grip. The TB(taper bushed) sprocket is another style of interchangeable bushed sprocket, which provides grip on a driven shaft. The Splittype sprocket is used in place of solid type to allow quick installation without disruption of shaft and alignment.
How to install a transmission sprocket on a Harley Davidson?
TOOL, Part No. HD-41184. Position nut (5) with flanged side facing transmission sprocket (4). Turn the nut counterclockwise to install it onto main drive gear (3). Using MAINSHAFT LOCKNUT WRENCH, Part No. HD- 94660-37B, and a torque wrench, tighten the nut to 50 ft-lbs. 8. See Figure 2. Scribe a line on the transmission sprocket
What are the dimensions of a sprocket roller?
SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CLACULATION SPEED RATIOS SPROCKET DIAMETERS HORSEPOWER RATINGS SPROCKETS American sprocket Manufacturers have adopted 4 specific types of sprocket construction styles as American Standards.
Transmission sprocket nut has left-hand threads; turn nut clockwise to remove from main drive gear. 2. Remove original spacer sleeve from main drive gear and remove original oil seal from transmission housing (right crankcase half on XL models), according to procedures in the appropriate Service Manual. 3. See Figure 1.
What to do when your sprocket won’t turn?
If your sprocket and clutch seem frozen and won’t spin, you should check the function of your brake spring, the lever and arm the spring uses to pivot on and the brake cable, which connects to the clutch. If you’ve removed the clutch parts and checked that the brake isn’t on, and your sprocket still won’t budge, try spinning the crankshaft stub.
Where is the compensating sprocket installed on a Harley Davidson?
The compensating sprocket (6) is installed with the text “this side out” facing outward. Clutch hub mainshaft nut has left-hand threads. Turn counterclockwise to install. The primary chain, compensating sprocket and clutch assembly must be installed as an assembly. 12.
TOOL, Part No. HD-41184. Position nut (5) with flanged side facing transmission sprocket (4). Turn the nut counterclockwise to install it onto main drive gear (3). Using MAINSHAFT LOCKNUT WRENCH, Part No. HD- 94660-37B, and a torque wrench, tighten the nut to 50 ft-lbs. 8. See Figure 2. Scribe a line on the transmission sprocket