Can I replace 40w incandescent with 60w LED?
Yes, you can use it! A 60-watt equivalent LED bulb uses around 8 watts on average. That’s 5X less than a 40-watt incandescent.
Is it possible to fix a bad low beam headlight?
Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.
Do you need to replace both high and low beams?
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.
Why are my low beam lights not working?
If it works, the bulb simply needs replaced. The most common reason for faulty low-beam lights is a blown fuse. Check your car’s owner’s manual for information on how to access the fuses and where they are located. Check for melted wires leading to any of the fuses, and replace said fuses if necessary.
Is there a fuse for the high beam headlamp?
No fuse aside from the BCM mega fuse, which would affect more than just one headlamp, fuse 74 is the high beam, but for both sides, The power to the headlamps is controlled by the BCM. Sounds like either the bulbs or the wiring to the right lamp. The BCM does split the circuits to either headlamp, so it is possible there’s a fault there as well.
Why is my low beam headlamp not working?
I get a low beam headlamp fault on the console, but when I replaced the bulb, it still doesn’t work. The car is 6 months old and there’s no condensation inside the housing. The fuses check out.
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.
What to do if you drop a low beam light bulb?
The oil on your hands can compromise the glass of the bulb, reducing its lifespan. Protect your bulb from this by wearing gloves or using a tissue any time you come into contact with the glass of the new low beam headlight bulb. Be careful not to drop the bulb as you remove it from the package.
What is the fuse number for a low beam light?
The number seventeen fuse has has power to both sides of the fuse with the low beams on. The black ground wire for the lamp has 0.1 ohms. With the low beams on and the light bulb out of the connector, the yellow wire reads 11.8. When I plug the bulb in and turn the lights on the yellow bulb reads 0.00 nothing.