Can a stator produce too much voltage?

Can a stator produce too much voltage?

So first off it’s not possible for your stator to ‘ feed too much voltage ‘ to the regulator….. and your bike does not have a rotor that can be ‘checked’. The charging system on your bike consists of a stator ( which is a wire winding in segments ), a field coil and the rotor which spins between them.

What’s the charging voltage on a Honda Accord?

is engaged), the ECM will set the charging voltage to 14.4-14.9V (high output mode); during startup and light electrical load conditions, the ECM will set the charging voltage to 12.4-12.9V (low output mode). In the latter case this anomaly might cause a technician to try to diagnose a low charge problem, although it is

What is the C circuit on a Honda Charger?

The IG circuit is crucial to proper charging system operation. send source voltage to the IG terminal, which is required to energize the voltage regulator. The C circuit is responsible for controlling the charge mode.

How does the 79-83 Honda DOHC charging system work?

79-83 Honda DOHC charging system help The regulator/rectifier is a box that actually contains two separate devices. The regulator is what sends the power to the rotor. It turns on and off power to the rotor so the magnet turns on and off so the system can maintain 14.4 volts at the battery.

How to troubleshoot a Honda car charging system?

Check for corroded wires, connectors, or terminals. Check for a pinched, cut, or damaged wire harness. Check for a blown fuse or a defective circuit protector (always replace the fuse with the correct size). If the new fuse blows after replacement, troubleshoot for a short circuit in the system.

79-83 Honda DOHC charging system help The regulator/rectifier is a box that actually contains two separate devices. The regulator is what sends the power to the rotor. It turns on and off power to the rotor so the magnet turns on and off so the system can maintain 14.4 volts at the battery.

Check for corroded wires, connectors, or terminals. Check for a pinched, cut, or damaged wire harness. Check for a blown fuse or a defective circuit protector (always replace the fuse with the correct size). If the new fuse blows after replacement, troubleshoot for a short circuit in the system.

How big of a battery do you need to charge a Honda Accord?

A minimum 14 Amp/Hour batterythat is known for certain to be good, has recently had a specific gravity test, a load test, and been fully charged overnight. There isn’t a charging system in the world that will charge a battery that is no longer viable, so test the battery before you waste any more time on fiddling with the charging system.

What’s the maximum voltage for a battery charger?

A good charging system supplies a maximal voltage of 14.4 Volts (6 x 2.4 V). If you charge a battery with 14.4V, the charging process automatically stops, when the battery has also reached 14.4V.