Can a motorcycle alarm be fitted by a fitter?
If you think alarms are more hassle than they’re worth, read our other article by clicking here. In this feature, we’re going to be fitting a Datatool Evo Plus, which is a combined alarm and immobiliser that can be fitted by your dealer, a professional fitter like The Bike Alarm Man or, if you’re handy with the tools, yourself.
What’s the best way to install a bike alarm?
You can use a sharp blade to carefully open the insulation, but I use a pair of automatic strippers. I then strip back the trimmed end of the alarm wire, wrap the exposed cable around the bike’s cable, then solder it in place for a very secure and reliable join.
What to use to insulate a motorcycle alarm?
If you’re picking up from more than one wire in the same area, try to stagger the joints, so if the insulation were to be damaged, the bare wires couldn’t touch one another. For the immobilisation wire that needs cutting, you can use heat-shrink tubing to insulate the joints, which is my preferred method.
What to do if your bike battery goes flat?
If you’re worried about your battery going flat, you can put the unit into a storage mode, which completely deactivates it, but leaves your machine immobilised until the ignition’s next turned on and the remote fob is pressed.
Why does my Honda CRV alarm keep going off?
The alarm on my Honda CRV keeps going off whenever I try to lock the car. It started after my battery went flat yesterday (left lights on) and breakdown came and jump started. I drove for around 1/2 hr to recharge battery, went home and tried to lock car in usual way with key fob. Alarm sounded. Everything I have tried has had no effect.
How to install an alarm system on a motorcycle?
Steps Buy a quality motorcycle alarm system. Find a wiring diagram for your motorcycle in your owner’s manual, online, or at your motorcycle dealer. Identify the features of the motorcycle alarm system that you plan to install on your motorcycle. Choose the wires you will use from the motorcycle alarm kit.
How to turn off car alarm on Honda Accord?
1 Insert the ignition key in the driver side door lock of your Honda accord. 2 Turn the key to the unlock position. 3 Then turn the key to the lock position. 4 Return the key back to the unlock position. Doing this should turn off the alarm.
Where is the fuse relay on a Honda Accord?
So many people have asked for where the fuse alarm is located on the 2007 Honda Accord. To locate the position, pop the bonnet, and remove the alarm relay. The alarm relay is located in the fuse compartment. After opening it, you will see a drawing on it that indicates the positions of the fuses and relays.