Can a faulty ignition switch cause an engine not to start?
Faulty ignition switch. To confirm your engine is not starting because it has no spark, you can do any of the following to check for spark: CAUTION: Secondary ignition voltage can shock you. Do NOT hold or touch a spark plug wire while cranking the engine.
Why is there no spark in my ignition?
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.
What to do when your engine has no spark?
Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. Finally, Have someone crank the engine and watch for spark. Remove one of the coils from the spark plug. Use an extra spark plug. A spark plug tester. Or even a screwdriver in the end of the coil.
Do you check for spark in no start?
In fact, with a crank/no start condition, I often check for spark first since it’s usually the easiest thing to check. Just be careful, as some ignition systems pack quite a punch and you don’t want to get shocked during your testing.
What to do if your spark plug is not working?
If there is no spark, unplug the white plug with blue and black wires that are at the bottom of the engine under the valve cover. Check for spark once again. If there is a spark, the coil is in good condition and the ignition kill relay or its wiring is at fault.
Faulty ignition switch. To confirm your engine is not starting because it has no spark, you can do any of the following to check for spark: CAUTION: Secondary ignition voltage can shock you. Do NOT hold or touch a spark plug wire while cranking the engine.
What to do if there is no spark at the ignition coil?
Check for voltage output at the ignition coil. Disconnect the ignition coil wire from the distributor and install the spark tester to the wire and ground the tester to the engine. Crank the engine for a few seconds. If there’s spark, the problem is with the distributor cap or rotor.
Why is the spark plug on my EZGO not working?
EZGO TXT/RXV Won’t Start and Not Sparking. Check for spark by replacing the existing spark plug with a clean and new plug. Although the old plug may appear to be in good condition, it could have got shorted because of carbon. Check if the coil wires are secured firmly on to the coil studs and the bracket is well-grounded.