Can a 96-98 civic be converted to an OBD1 injector?
Convert to OBD1 injector plugs by cut/splicing OBD1 injector plugs to your OBD2 EWH, color matching the wires – or – find yourself a set of OBD2 injectors (any 96-00 injectors, B-series to be specific, but D-series will work too) which will PnP to your 96-98 EWH (easiest option).
How to swap OBD1 Alt plug on Honda Civic?
Ok swapping the obd1 green circle alt plug onto the civic harness is easy. Cut your brown plug off. Wire it the obd1 alt plug onto your engine harness. Use heat shrink to keep moisture out, some electrical tape and you are good to go.
How to swap a JDM B16A Gen2 into a Civic EX?
How To: Swapping a JDM B16A Gen2 (obd1) motor into a 99-00 Civic EX. This is my how to: I am no expert and their are other ways to swap in a engine but this is what I did and it worked.
What kind of ECU do I need for a 96-98 civic?
OBD1 ecu’s are very forgiving and not as sensitive as US OBD2 ecu’s are. Stay US OBD2 spec by using a 96-97 DOHC VTEC Delsol P30 ecu; 96-99 Integra P72/GSR ECU; or 96-98 P73/ITR ECU.
Can a 96-98 civic be used as an OBD2?
Depending if you own a non-VTEC or VTEC model EK civic you can and should reuse your existing EWH (or run a 96-98 EX 5spd EWH). You cannot use an OBD1 EWH in an OBD2 civic.
Where is the OBD2 sensor plug on a Honda Civic?
Your OBD2 IAT sensor plug is different than that of an OBD1 IAT. So, you can either keep your existing IAT sensor and make it work by making a hole in the intake arm. Or you can cut/splice the OBD1 IAT plug and mate it to your EWH so you can use the OBD1 IAT sensor thats located on the intake manifold runner.
OBD1 ecu’s are very forgiving and not as sensitive as US OBD2 ecu’s are. Stay US OBD2 spec by using a 96-97 DOHC VTEC Delsol P30 ecu; 96-99 Integra P72/GSR ECU; or 96-98 P73/ITR ECU.
Is the OBD1 EWH compatible with the EK Civic?
OBD1 EWH’s are totally incompatible because of their 2-piece design. All EK civics use a 1-piece EWH design. 2-piece means the harness has a break off point at the shock tower; 1-piece means the harness has no break off points at all and runs all the way down through the firewall directly to the ECU.
What kind of engine harness does a civic use?
Rywire engine harnesses are 100% quality tested pin to pin and resistance checked to ensure no voltage fluctuations. This engine harnesses is made with 92-95 OBD1 ECU connectors and is a plug-n-play affair for 88-91 civic/crx, 92-95 civic, 92-97 delsol, 96-00 civic, and 94-01 Integra vehicles that are utilizing an OBD1 ECU and OBD1 B-series engine.
Can a Honda Civic be converted to a Honda Integra?
This harness allows you to adapt a JDM or US OBDI M/T ECU into an 88-91 Civic, CRX or a 90-91 Integra, OBD0 Chassis. Our harness also includes a 3’ pigtail to simplify wiring any additional or required sensors to complete the installation. BLOX Part # BXAC-00700
How does the engine harness work on a Honda Civic?
The main engine harness is a series of wires that connects all of the motor’s electrical components. There are several wires, all of which are bundled together in a wire loom and electrical tape.
Convert to OBD1 injector plugs by cut/splicing OBD1 injector plugs to your OBD2 EWH, color matching the wires – or – find yourself a set of OBD2 injectors (any 96-00 injectors, B-series to be specific, but D-series will work too) which will PnP to your 96-98 EWH (easiest option).
This harness allows you to adapt a JDM or US OBDI M/T ECU into an 88-91 Civic, CRX or a 90-91 Integra, OBD0 Chassis. Our harness also includes a 3’ pigtail to simplify wiring any additional or required sensors to complete the installation. BLOX Part # BXAC-00700