Are there any problems with Mercedes Benz COMAND system?

We have listed down common issues with the Mercedes-Benz COMAND system, including problems with The most common solution to fix any of these issues is to try to perform a soft reset of the COMAND unit.

How to identify which Mercedes command head unit my?

Mercedes-Benz NTG 5 COMAND (NTG5HU) is found on several models including W205, V-Class, W222, GLC, etc. It has built-in Bluetooth calling, DVD drive, ability to playback DVD, CD, MP3. Build in navigation and even a built-in hard disk for storing music files.

How much storage does a Mercedes COMAND have?

Up to 40GB of internal storage. The monitor is 8.4″ LCD. Can be controlled by the touch panel on the central console. Can support iPod, TV tuner, rearview camera, enable DVD while driving. It requires an anti0theft code. COMAND 4.7 is an updated version of the NTG4.5.

What do you need to know about Mercedes COMAND APS?

Can be controlled by the touch panel on the central console. Can support iPod, TV tuner, rearview camera, enable DVD while driving. It requires an anti0theft code. COMAND 4.7 is an updated version of the NTG4.5. The main change is that it allows sharing the internet of your iPhone or Android phone with the head unit.

Can you replace the command unit on a Mercedes SL550?

In my case, I replaced the COMMAND unit on my 2007 SL550 with the Kenwood. Very important – if you add a back-up camera, be careful on how you run the wire from the camera. The trunk opens BOTH ways, so you have to allow extra length. 11 people found this helpful. Thank you. I plan to keep the car, it is pristine and has 30K miles on it.

Are there radio replacements for Mercedes Benz COMAND?

Driven Audio is now offering the world’s first radio replacement module to work with many Mercedes-Benz COMAND Radioequipped vehicles on the M.O.S.T network. Many Mercedes radios from 2003 to 2008 vehicles, don’t have Bluetooth or they have outdated Bluetooth that may not be compatible with today’s phones.

Can you upgrade 2008 MB in Mercedes SL550?

The upgrade is not Kenwood specific. You can use most any radio you chose. The dash kits are designed for any 7″ screen. SpiralAudio.com in Orlando has exactly what you need for $59.99. The module to convert the MB fiber optic system is readily available on the internet. A module for the 2009 SL550, however, is more expensive and less available.

What’s the sound of a Mercedes Benz G 500?

Twin sidepipes on both sides in front of the rear wheels modulate the G-typical sound of the G 500 4×4² and master the entire repertoire of potent sports cars – from soft mumbling in neutral through sonorous humming in the partial-load range to emphatic booming when accelerating under full load. G-typical sound.

How to access COMAND secret menu in Mercedes Benz C-class?

Contact your MB dealer or check MB Owners’ Forums if you have any questions. Turn the ignition key to the on (not start) position. Hold the red “hang up telephone” button, the hash (#) key and the one (1) key simultaneously on the COMAND console for 3-5 seconds.

How does the Mercedes COMAND navigation system work?

You can slide the cursor around to any destination using the touchpad, then pinch and zoom in and out of a destination like with a smartphone. It’s handier than using the dial for the same function. The pad also can be used to write destinations into the navigation system.

How do you turn off the COMAND in a Mercedes?

The radio will turn off. Once you close the door wait a couple of seconds and then by touching the door handle the car will lock. You can unlock the car remote, get in and by pressing the “on” button on the Comand the radio will turn on, without the key being in the car or close to it. Once you are in and you close the door the radio remains on.

What does it mean when Mercedes says navigation cannot be activated?

After inserting the navigation DVD in your Mercedes-Benz COMAND, you get a warning message “Navigation Cannot Be Activated.” You press the NAVI button on the COMAND but get an alert message saying “”Navigation can not be activated. An error has occurred.” N1112 No data transfer between D2B master and D2B predecessor component possible.

Is there a reset procedure for the E-class?

The following E-Class reset procedures can be very handy in the right circumstances, but make sure you fully read the information about them before attempting the procedure. They follow the same pattern as the synchronisation procedures in the above section in that each has a “Related Issue” listed that the reset procedure is designed to solve.

How to reset service interval on Mercedes E class?

To reset you need to press and hold button ‘R’ (on the instrument cluster) until you here a beep and ‘SERVICE INTERVAL HAS BEEN RESET’ will now appear on the display. 7. The new service interval will now be displayed as10,000 miles

Where to find service indicator on Mercedes E-class?

Go to the main odometer screen on the driver information display using the multifunction steering wheel buttons. 3. Scroll through this screen using the multifunction steering wheel buttons until it shows the service indicator (FSS) sub-screen. 4. Press and hold down button ‘R’ on the instrument cluster corner for 2 seconds. 5.

Is the radio on my Mercedes Benz E320 not working?

I have a e320 2003 and the radio unit doesn’t work anymore i thought the display (lcd) was gone .

What to do if your Mercedes Benz Radio is not working?

For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.

How to soft reset COMAND / nav radio system?

How to perform a soft reset of the COMAND / NAV Radio System. Find the fuse box under the dashboard. Pry the side cover, look for fuse 26 and 28 and remove both fuses. The second fuse box may be on the left side of the trunk. Locate and remove fuse 6. Take out the key from the ignition and don’t turn on the car for at least 15 minutes.

Can a 3rd party head unit replace COMAND?

Adding a 3rd party head unit to replace COMAND in a Mercedes MOST fiber optics system has been impossible without replacing the amp and virtually everything connected to the fiber optic loop. That problem has been resolved.

How to replace COMAND in Mercedes Benz 2004 E?

With the previous (2002) ML things were straight forward just because the MB HU was connected to the amp and speakers via copper wires. With the 2004 E I had to bypass the FO and the AGW in the trunk (I rewired the new HU, therefore I was able to use the original speakers).

What happens when I leave my computer unattended and it crashes?

It can be a source of frustration if the software crashes or hangs just after you leave it unattended because it will then have to stay that way until you come back to rectify the problem. What could be even more annoying is having other users or children closing the program down not knowing or caring that it’s supposed to stay running.

What’s the difference between restart on crash and restart on hang?

Restart On Crash Restart On Crash is slightly different because it was designed primarily as a tool to restart a program after it’s crashed or hung, but is equally at home in restarting an application that has been closed accidentally or by someone else.

What to do if Mercedes GL450 suspension fails?

If your Mercedes-Benz GL450 is experiencing suspension failure, converting to a coilover system is the logical choice. Not only will you save money, you’ll never have to deal with the endless repairs of an air suspension again. Check out the suspension kit in action in this ride-along video!

Is there a warning light on my Mercedes GL450?

This is referred to as a “nose dive.” Mercedes also included a suspension warning light that will illuminate when there is a problem. However, this might come later than some of the physical symptoms. If you are noticing any of these symptoms in your Mercedes-Benz GL450, it is time to have your suspension serviced.

How does the Mercedes Benz GL450 air bag system work?

Your Mercedes-Benz GL450 has ride height sensors at each wheel. These sensors send a signal to the control module, letting it know how much the air bags need to be inflated or deflated. Then, the control module sends this information to the compressor. The compressor pushes air into the airbags.

How does the Mercedes-Benz GL450 ride height sensor work?

How to fix a Mercedes Benz navigation system?

Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order. Chances are the symptoms may return. If this happens repeatedly, a professional Mercedes Benz repair technician or mechanic can help check any updates for your COMAND / navigation unit. Find the fuse box under the dashboard.

Why does my Mercedes Benz engine not start?

Stated in a different way, the engine cranks around fine, but it doesn’t fire up. In fact, there is not even a sputter like it’s trying to start. This is because the main computer control module isn’t receiving a crankshaft input signal.

What are the most common Mercedes Benz transmission problems?

Top 5 Mercedes-Benz Transmission Problems. Won’t come out of Park gear due to a defective brake light switch. ( DIY How to replace the Brake Light Switch) Continue to read if you would like to learn how to troubleshoot your Mercedes-Benz transmission yourself and where you should start. 1. Check Fluid Level

Why is the crank sensor on my Mercedes not working?

The crank sensor is not detecting the rotation of the crankshaft and therefore isn’t firing the ignition system. I’ve seen this failure on all different types of cars, but the Germans are known for their superior engineering and I was a little surprised the crank sensor had failed on this 3.2 L V-6 engine with only 42,000 miles on it.

What kind of engine does a Mercedes R320 CDI have?

A 3.2-litre CDI V6 power-plant with a bold chrome-trimmed grille and huge headlights. Great performance with a 215-hp 3.0-liter turbo-diesel V6. R320 cdi and all new ML320 cdi & GL 320 cdi & E320 cdi & E280 & grand cherokee crd & MB / dodge sprinter all use the same MB 3.0Lcrd OM642. So please stop saying the 320 series is a 3.2L diesel.

What kind of suspension does a Mercedes R320 have?

The R320 handles very well for its size, thanks to the combination of the pneumatic suspension and the 4matic transmission. It feels well planted on the ground and surprisingly agile for such a tall and heavy vehicle. However, we didn’t find much difference between the two suspension settings: comfort and sport.

Is the Mercedes R320 considered a minivan?

There are no Mercedes signature designs missing on the R-Class. The result is a very sharp looking vehicle that will blend nicely next to the neighbor’s Range Rover. It would be unfair to categorize the R320 as minivan because there would simply be no competition.

What to do if your Mercedes COMAND control knob is broken?

Save money by simply replacing the broken plastic shaft with a new aluminum version of it. You can replace the broken shaft yourself or send your Mercedes COMAND unit to a company such as IE Works, which will repair your unit and return it to you. Here is a link where you can order their service: Mercedes COMAND Broken Shaft Service on eBay

When did COMAND come out for Mercedes C class?

It won’t grant you extra lives and bonus points, but it will help you a lot with customizing the electronics in your W204 Mercedes. This article applies to the Mercedes-Benz C-Class (2007-2014). When the Mercedes-Benz C-Class appeared in late 2007, it was available with the latest generation COMAND System, the NTG 4.

How does the Mercedes Bluetooth head unit work?

MB-4 provides full integration with the Mercedes-Benz vehicles equipped with telephone equipment and Plug and play connection. Up to four phone pairing. Phonebook synchronization. SIRI activation from Mercedes keypad for iPhones. Instrument Panel Display: Your phone book automatically downloads into your MB head unit.

What is the Bluetooth pairing code for a Mercedes Benz?

The pairing code is typically 1234 or 0000. Mercedes Bluetooth adapter instructions can also be found in the owner’s manual located here. Some Mercedes-Benz cars may require an update to function with newer phone models. If your phone is not pairing or the address book isn’t downloading check with a dealership to see if an update is available.

What kind of transmission does the Mercedes S430 have?

The Mercedes Benz S430 is part of the S-Class family of cars from manufacturing giant Mercedes Benz. Initially, the car had a 5-speed 5G-Tronic transmission, but in 2003, it was offered with the newer 7-speed 7G-Tronic transmission. It was part of a series of flagship sedans called W220.

Where is the control arm on The S430?

Control Arm with Ball Joint Assembly, Front Lower Forward… Control Arm Front Upper and Lower, Driver Side and Passenger…

Is there a recall on the Mercedes S430?

When that happens, the harness and control module might need replacing. The trunk lid springs on the S430 may fail and may cause the trunk lid to remain in an open position. Almost 17,000 vehicles were recalled by Mercedes in 2004. Dealers replaced both trunk lid springs, as keeping them when they are damaged poses a great risk of injury.

Why is my Mercedes-Benz SL Class not working?

If it is open – the computer thinks the trunk doesn’t have room for the top so it will not operate. Your model of SL does not have the retractable top, but probably still has a similar type system. Try this link – http://mbworld.org/forums/sl-class-r129-18/ this should be a good starting point to finally get the problem resolved

How do I reset the soft top on my Mercedes SL?

This is usually accomplished by having the cargo cover in place and closed. If it is open – the computer thinks the trunk doesn’t have room for the top so it will not operate. Your model of SL does not have the retractable top, but probably still has a similar type system.

When does the COMAND system shut down Mercedes Benz?

I persisted with MB technical support; here is how they replied: The E350 has an on-board system which continuously monitors voltage. The Comand system is apparently one of the largest electrical loads on the vehicle. When the level goes beyond a certain threshold, Comand is intructed to shut down.

Can you bypass a component in a Mercedes Benz?

If you bypass a component and the problem is not solved, then try the next component on the list. The Audio Gateway AGW can also be defective. That is the brains of the Mercedes-Benz COMAND system, therefore you can not bypass it. You will need to replace the whole unit.

Is there a way to turn off the COMAND system?

Upon leaving though you will have to turn the Radio off thru the Comand “on” button since by opening the door this will not shut off the radio. According to what MM9351 wrote underneath his member name, the car is equiped with P2. That means he has the keyless start/stop feature. Unless of ofcourse he took the button out and is using the key.

Why is the push start on my Mercedes not working?

The problem started with the Keyless Go feature. The key would unlock the car via keyfob and start it by inserting the key in the ignition. But Keyless Go stopped working. Push Start or unlocking the car by pressing driver’s door handle stopped working.

What to do if Mercedes Benz audio gateway is defective?

You need to figure out which component is defective by bypassing each component until you find the problem. The Audio Gateway is the brains of the Mercedes-Benz COMAND system. You will need to have an authorized Mercedes-Benz service technician replace the whole unit if AGW is defective. This entry was posted in Info Articles.

What causes a Mercedes central gateway to fail?

One or more of the following lights may come on. When the Mercedes Central Gateway Module fails, one or more of these systems may stop working. Mercedes Central Gateway Module may fail due to water damage. It can also fail from internal software or hardware defects.

Why does my Mercedes zgw control module not work?

Mercedes-Benz Central Gateway Module ZGS (also referred to as CGW) may fail, causing various warning lights or systems to stop working. Mercedes Central Gateway module is the hub that allows communication between various modules. Mercedes ZGW Gateway control module stores data for Mercedes ASSIST or ASSYST plus.

What are the problems with a Mercedes Benz COMAND?

Some common problems with the Mercedes-Benz COMAND system include issues such as: Radio panel doesn’t turn on. (Hint: Check fuses.) The fist thing you should try is to do a soft reset of the COMAND unit. To do a reset you will need to remove the fuses for at least 10 min for these systems:

When does Mercedes Benz COMAND system stop functioning?

When one of your components goes down, your COMAND will stop functioning. You need to figure out which component is defective by bypassing each component until you find the problem. The Audio Gateway is the brains of the Mercedes-Benz COMAND system.

How do you reset the ECU on a Mercedes Benz?

Once both windwos are all the way down make both swithches click by pressing them all the way down. This lets the ECU learn that that is the end of the window track and it records it in memeory. Do the same closing the windows by holding both switches and making them click once the windows are all the way up.

Why is the COMAND screen blank on my 2001 ML 320?

I have the same problem, my Mercedes 2001 Ml 320’s comand screen is also blank (totally blacked out) espeacially when I turned it on. I tried turning it off, and back on, switching between different functions . please just advice me what should I have done ot getting a solution.

Can you bypass the COMAND system on a Mercedes Benz?

You will need a Fiber Optic Loop Adapter to bypass the system, one at a time until your COMAND system will work. If you bypass a component and the problem is not solved, then try the next component on the list. The Audio Gateway AGW can also be defective. That is the brains of the Mercedes-Benz COMAND system, therefore you can not bypass it.

Why is the command screen on my Mercedes not working?

I have a similar problem. My car is GL450. The Command screen went black and the system is not responding to the out eject button. But I can still play all my cd (s) and listen to radio but I can’t see anything on the screen. I have taken the car to a Benz workshop, they can not help my situation as they asked me to replace the whole unit.

Can a Mercedes Benz audio gateway be defective?

The Audio Gateway AGW can also be defective. That is the brains of the Mercedes-Benz COMAND system, therefore you can not bypass it. You will need to replace the whole unit. The only testing that you can really perform with the AGW, is to make sure it is getting power.

What are the common problems with Mercedes diesels?

Here are some common problems that affect many Mercedes-Benz diesel models including E350, ML350, GL350, R350, Sprinter, R320 CDI and BlueTec models. Common problems Diesel Particulate Filter. As Mercedes DPF traps and holds soot, with time it reaches a point when it needs to be ‘emptied out’. This is done by regeneration.

How do you defrost a Mercedes Benz without cranking the engine?

Insert the key into the Mercedes ignition and turn the ignition cylinder to the “2” position. This is as far as the cylinder will go without cranking the engine. Press and hold the defrost and recirculated air buttons simultaneously.

Are there any problems with Mercedes Benz C63 AMG?

Weistec replacement head studs. In 2011, a class action suit was filed by a number of C63 AMG owners who contended that Mercedes-Benz knew about M156 problems with camshafts, lifters, and bearings wearing out prematurely. That led to thousands of dollars in repair costs for customers.

What’s the engine number on a 2011 Mercedes Benz C63?

Figure 2. Old vs. new head bolts. The new head bolts were installed starting with M156 engine #60658. If you know where to locate it, you can check your engine number. Some owners’ forums report finding numbers less than 60658 on 2011 C63s.

Can you read the fault code on a Mercedes Benz?

Can read fault codes from multiple systems such as transmission, engine, ETS, airbag and more. Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS

Do you need a radio code for a Mercedes Benz?

If you had a dead battery or replaced the battery, you may need to enter the code in your radio. Follow these steps if you need the Radio Code for your Mercedes-Benz. First take a look at your owners manual booklet. The code may be written down on a small business card size letter.

Is the command system on my Mercedes S350 working?

Our 2006 S350 is experiencing similar problems with the Command system showing the Mercedes logo. We took it to our Mercedes dealership … read more associates in automotive te… Factory Mercedes-Benz Te…

Are there any problems with the Mercedes S430?

Mercedes-Benz S430: I have problems with my command center. I have problems with my command center. It all started to not hear anything through the speakers, then with distortion on the screen but was … read more Factory Mercedes-Benz Te… Vocational, Technical or Tra…

Why is the command center not working on my GL 450?

The command center display on my 2008 GL 450 is not showing (just bright white) but everything else (CD, radio, ipod) works. What may be wrong? … read more I just bought a 2006 S430. I am having trouble with the Command center. I saved satilite stations and set the clock. It is now resetting back to German time and I am loosing all my presets.

Where are the fuses on a Mercedes Benz C Class W204?

Location of fuses for Mercedes Benz C Class W204, years 2008 to 2015, models C180 C200 C250 C300 C350 C63 AMG If you replace any fuses, make sure to replace it with the same color fuse. If there is an underlying problem you could overload the wires or even cause more serious problems to that circuit if you use a higher ampere fuse.

Is there a Bluetooth radio in a Mercedes SL550?

I have a Mercedes 2007 SL550 And it come with Bluetooth for my cell phone but not for my music. Car has no aux connection either, all it has is behind the seat a 6 pack CD player. Is it possible to adapt Bluetooth capabilities through there. Anything to help me with my issue will be highly appreciated.

Which is Mercedes Benz engine control unit to replace?

Some of the most popular ecm’s we sell are 2000, 2002, 2003 and 2004 C class and 2005 E320 models. The 2007 S550 ecu is also a popular item. Part number A2731535079 and A2731535679 are both popular S550 replacements. Call us if you have any questions.

What to do before driving a Mercedes Benz COMAND?

WelcometotheworldofMercedes-Benz Before you drive off, familiarize yourself with yourCOMAND control panel and read this manual. This will help you to obtain the maximum use from your COMAND control panel and to avoid endangering yourselfand others.

What are the parts numbers of a Mercedes COMAND?

Part Numbers : A246 900 95 12, A246 900 95 12, A246 900 12 06, A246 901 00 01, A246 901 00 01 COMAND NTG 2.5 has a 6.5″ LCD screen and is installed on many 2009 to 2012 Mercedes-Benz models including ML, GL, R, SLK, SL, E classes.

What do you call a Mercedes COMAND APS Head Unit?

All new head units with MOST system are called COMAND APS. To separate them from the early COMMAND systems. The NTG1 has a build in CD player which can play MP3. It may also have a cassette player. Some models have built-in navigation. It required the maps to be loaded via a CD.